SunWize Power Systems Completes 309 kW Installation for the VA

SunWize Power Systems, the residential and commercial installation business unit of SunWize Technologies, Inc., recently completed a 309-kW DC solar electric system for the Department of Veterans Affairs (VA) at the Jerry L. Pettis Memorial Medical Center in Loma Linda, CA.

Contact: Dave Holt

SunWize Technologies, Inc.
Tel.: 805-625-2121
E-mail: dholt@sunwize.com

Press Release
For Immediate Release

SunWize Power Systems Completes 309 kW Installation for the VA
At the Forefront of Federal Agencies' Initiatives in Renewable Energy

San Jose, CA October 13, 2008 - SunWize Power Systems, the residential and commercial installation business unit of SunWize Technologies, Inc., recently completed a 309-kW DC solar electric system for the Department of Veterans Affairs (VA) at the Jerry L. Pettis Memorial Medical Center in Loma Linda, CA. The installation is the first solar electric project in a Veterans Affairs-wide push to use renewable energy and improve energy efficiency.

On January 24th, 2007, President Bush signed an executive order for Federal agencies to improve energy efficiency and reduce greenhouse gas emissions by 3% per year or 30% by the end of 2015. In response, the VA developed a comprehensive department-wide energy management plan and surveyed its major facilities for their solar, wind, geothermal, and biomass energy potential. Their evaluation identified the Loma Linda, CA and Dallas, TX facilities as the top candidates for photovoltaic (PV) systems. SunWize Power Systems responded to the VA's requests for quotes and was awarded both contracts.

The Loma Linda Medical Center PV system, completed in September, is expected to save the hospital approximately $60,000 a year in electricity costs. It consists of 1,584 Sanyo 195-watt PV modules roof mounted onto SunLink racks. The system utilizes an Advanced Energy Solaron 333-kW inverter and is monitored by Fat Spaniel Technologies. It is one of the highest efficiency systems available today.

"An installation of this size presented considerable challenges due to 24/7 hospital operation," states Larry Barrett, Energy Manager at the Jerry L. Pettis Memorial Medical Center. "We are appreciative of the expert project and construction management of SunWize and their ability to work within the many location, timing and safety constraints. We are also impressed by the quality of the installation and the attention to detail."

"Hospitals are big users of energy, so whatever the VA can do to become a good 'green' neighbor will benefit all of us, both in the short and long terms," said Dr. James B. Peake, Secretary of Veterans Affairs in a prior statement. "I'm proud of these innovative steps our people are taking and look for them to expand."

"We are pleased and honored to work with the VA and the Medical Center in Loma Linda in their effort to increase the use of renewable energy. SunWize applauds their recognition that solar electric is already a viable electric power solution" adds David Kaltsas, SunWize Executive Vice President.

SunWize Technologies, Inc., a subsidiary of Mitsui & Co. (U.S.A.), Inc., specializes in the design and manufacture of solar energy systems, product distribution, and associated project development. The Company operates a manufacturing and distribution facility in Kingston, New York, serving as the company headquarters; a distribution warehouse in Willits, California; a manufacturing and distribution center in Rancho Cucamonga, California; and regional sales offices throughout the US and Canada. In addition, SunWize Power Systems operates five regional offices in California. For more information, call Dave Holt at (805) 625-2121 or visit www.sunwize.com.

SunWize Technologies, Inc. Distributed Power Group
111 W. St. John Street, Suite 1200 • San Jose, CA 95113, USA • (408) 510-5170 • Fax (408) 885-9523
e-mail: info@sunwize.com • www.sunwize.com

Featured Product

HPS EnduraCoilTM Cast Resin Medium Voltage Transformer

HPS EnduraCoilTM Cast Resin Medium Voltage Transformer

HPS EnduraCoil is a high-performance cast resin transformer designed for many demanding and diverse applications while minimizing both installation and maintenance costs. Coils are formed with mineral-filled epoxy, reinforced with fiberglass and cast to provide complete void-free resin impregnation throughout the entire insulation system. HPS EnduraCoil complies with the new NRCan 2019 and DOE 2016 efficiency regulations and is approved by both UL and CSA standards. It is also seismic qualified per IBC 2012/ASCE 7-10/CBC 2013. Cast resin transformers are self-extinguishing in the unlikely event of fire, environmentally friendly and offer greater resistance to short circuits. HPS also offers wide range of accessories for transformer protection and monitoring requirements.