Thin Film Solar Summit Europe receives tremendous response

Over 130 industry executives have already confirmed their participation for Thin Film Today's forthcoming Thin Film Solar Summit Europe, scheduled to take place in Berlin May 19-20.

The two-day conference, scheduled to take place on May 19-20, has already received confirmation from the best in the business including First Solar, Applied Materials, Oerlikon Solar, Centrotherm Photovoltaics, Phoenix Solar, Nanosolar and many more.


One of the highlights of the conference is going to be the assessment of market segmentation for thin film PV in Europe.

According to Daniela Schreiber, Head of Research Operations, EuPD Research, who is scheduled to speak during the conference, flexible substrates in the segment of commercial rooftop and building integrated PV may increase. Both technologies are considered to be increasing market segments in Europe.

"C-Si and CIS/ CIGS are the technologies with the highest efficiency. But on the other hand they have a high temperature coefficient. That means that energy yield decreases by rising temperatures. In countries with comparatively temperatures like Germany, the focus is on technologies like that. Technologies like a-Si or CdTe with a low temperature co-efficient are profitable in countries with a high temperature just like in Australia, India or Mexico as the lower efficiency may be outpaced by the temperature coefficient. The future for technologies like this is in such countries," said Daniela.

A company like Phoenix Solar, which has seen its thin-film product mix growing to 57.2% in 2008 and going forward the thin-film product mix is further expected to increase to approximately 60% in 2009, is bullish about the sector.

"In general, the environment is still very positive for PV and some of the latest activities and new credit support programmes such as from KFW in Germany will certainly help the industry to overcome the lending issues," said Manfred Bächler, CTO, Phoenix Solar, who is scheduled to be a part of the inaugural session.

There are only a very limited number of seats still available for the event, click here for more information on registration or contact the organiser on the details below.

For more info, contact: Joshua Bull at +44 (0) 207 3757227 or email josh@cpvtoday.com

Website: www.thinfilmtoday.com/eu

Featured Product

HPS EnduraCoilTM Cast Resin Medium Voltage Transformer

HPS EnduraCoilTM Cast Resin Medium Voltage Transformer

HPS EnduraCoil is a high-performance cast resin transformer designed for many demanding and diverse applications while minimizing both installation and maintenance costs. Coils are formed with mineral-filled epoxy, reinforced with fiberglass and cast to provide complete void-free resin impregnation throughout the entire insulation system. HPS EnduraCoil complies with the new NRCan 2019 and DOE 2016 efficiency regulations and is approved by both UL and CSA standards. It is also seismic qualified per IBC 2012/ASCE 7-10/CBC 2013. Cast resin transformers are self-extinguishing in the unlikely event of fire, environmentally friendly and offer greater resistance to short circuits. HPS also offers wide range of accessories for transformer protection and monitoring requirements.