Stahlin Enclosures Becomes Only Enclosures Manufacturer To Currently Hold UL 1741 Certification

Stahlin Non-Metallic Enclosures, manufacturer of the world's most frequently specified fiberglass enclosure products, announces that they have been granted UL1741 Certification.

Belding, MICHIGAN --- Stahlin Non-Metallic Enclosures, manufacturer of the world's most frequently specified fiberglass enclosure products, announces that they have been granted UL1741 Certification.


The UL1741 standard, entitled Distributed Generation Power Systems Accessory Equipment, is an Underwriters Laboratory (UL) standard essential to product safety and reliability issues within the distributed generation market.

Stahlin enclosures were evaluated under the UL1741 standard for inverter, converter, controllers and interconnection systems equipment for "Use With Distributed Energy Resources" within the United States. Stahlin enclosures were also evaluated under the CSA-C22.2 No. 107.1 "Standard for General Use Power Supplies," for use in Canada.

UL File number E333478 denotes Stahlin enclosures as a photovoltaic combiner box component and recognizes the required achievements obtained under prior UL 746C, Polymeric Materials "Use in Electrical Equipment Evaluations" for outstanding UL94-5V flammability rating. UL94-5V is a standard that not all current enclosure manufacturers have attained, especially in tandem with NEMA 6 or 6P type ratings established under UL-50, Enclosures for Electrical Equipment.

For More Details visit: www.stahlin.com

Or, contact: Jolynn Stalsonburg, 500 Maple Street, Belding, Michigan 48809. Phone: 616-794-0700, Fax: 616-794-3378. E-Mail: jstalsonburg@stahlin.com

Featured Product

Sun Xtender® Deep Cycle AGM Batteries

Sun Xtender® Deep Cycle AGM Batteries

Sun Xtender® Deep Cycle AGM Batteries for renewable energy storage are manufactured in the USA by Concorde Battery Corporation and are built to the same demanding standards crucial to supporting the aircraft industry. To facilitate maximum conductivity & charge acceptance Sun Xtender® batteries are constructed with copper alloy corrosion free terminals & robust intercell connections. Endurance and optimal float life are achieved through plates thicker than the industry standard. Sun Xtender® Batteries' AGM maintenance free design is an ideal solution for off grid and grid tied systems.