Krayden Introduces Dow Corning's 1-2620 Solar Cell Coating

The Dow Corning 1-2620 low-VOC conformal coating is an abrasion resistant protective coating for solar cells and modules that can be used for module repair of abrasions, cuts and scratches.

DENVER — Krayden, Inc., a leading distributor of engineered materials, debuts Dow Corning's 1-2620 Solar Cell Coating.


Dow Corning 1-2620 is the low viscosity conformal coating version of Dow Corning 1-2577. The Dow Corning 1-2620 low-VOC conformal coating is an abrasion resistant protective coating for solar cells and modules that can be used for module repair of abrasions, cuts and scratches.

Dow Corning 1-2620 features good dielectric properties, resistance to humidity and other harsh environments, excellent abrasion resistance and a firm, dry surface for better handling after cure. Additionally, the coating can be accelerated with mild heat to provide faster cure times, is VOC exempt solvent-borne and has a low viscosity. The DC 1-2620 conformal coating is a self priming, translucent liquid, one-part RTV silicone resin that cures to clear elastoplastic resin film ideally suited for solar applications.

Additional information about Dow Corning's 1-2620 Solar Cell Coating can be found by contacting Krayden, Inc., authorized distributor of adhesives, sealants and coatings, online at www.krayden.com.


###


About Krayden, Inc.
Krayden, Inc. is a stocking distributor featuring adhesives, sealants, encapsulates, coatings, solder, solder chemicals, release agents, dispensing equipment and supplies with locations throughout the United States and five locations serving Mexico. The company represents only the leaders in the engineered materials industry, and is fully supported by these manufacturers as well as committed to updating its customers' about new products for their applications. Krayden, Inc.'s inventory is constantly being monitored for quality and shelf life at all locations. The company has the ability to customize its inventory based on customer's requirements, and it prides itself on having technical knowledge of its product lines. For more information, visit Krayden, Inc. at www.krayden.com.

Featured Product

Sun Xtender® Deep Cycle AGM Batteries

Sun Xtender® Deep Cycle AGM Batteries

Sun Xtender® Deep Cycle AGM Batteries for renewable energy storage are manufactured in the USA by Concorde Battery Corporation and are built to the same demanding standards crucial to supporting the aircraft industry. To facilitate maximum conductivity & charge acceptance Sun Xtender® batteries are constructed with copper alloy corrosion free terminals & robust intercell connections. Endurance and optimal float life are achieved through plates thicker than the industry standard. Sun Xtender® Batteries' AGM maintenance free design is an ideal solution for off grid and grid tied systems.