Webinar – CSP cost and feasibility in the MENA region

As the concentrated solar power industry turns its attention to the Middle East and North Africa, CSP Today is hosting a webinar to discuss the opportunities on 12 February 2013.

Expectations are high that the Middle East & North Africa will be a key future market for CSP technology. The contrast between traditional markets around the world hitting roadblocks and recent publicised progress of plants such as Shams One (UAE) and Ouarzazate (Morocco) was highlighted in CSP Today's recent guide to the region.


Industry analysts have highlighted that cost reduction is key to the success of CSP in MENA, as the generation cost needs to be low to compete with subsided energy prices. High initial investment costs have deterred interest, but the value of dispatchability is starting to change this.

To discuss the wide-ranging questions of CSP cost and feasibility, CSP Today has organised a free webinar, taking place on Tuesday 12th February at 08.00am GMT / 09.00 CET / 12.00 GST.

Luis Crespo, President of ESTELA and Mohammed Abutayeh, Mechanical Engineering Department at KUSTAR will join Belen Gallego, Founder & Director at CSP Today for the 60 minute session to debate and discuss the following topics:

The status of the MENA markets and a focus on Saudi Arabia, using exclusive data from the CSP Today Global Tracker

A comprehensive cost analysis of CSP technology

A detailed exploration into hybridisation and integrated solar combined cycle options

The webinar can be joined for free at by following the link below, and with limited spaces available it is advised that you sign-up early. Sign up here:

https://www3.gotomeeting.com/register/879140814

Contact information:

Matt Carr
CSP Today
matt@csptoday.com


Featured Product

HPS EnduraCoilTM Cast Resin Medium Voltage Transformer

HPS EnduraCoilTM Cast Resin Medium Voltage Transformer

HPS EnduraCoil is a high-performance cast resin transformer designed for many demanding and diverse applications while minimizing both installation and maintenance costs. Coils are formed with mineral-filled epoxy, reinforced with fiberglass and cast to provide complete void-free resin impregnation throughout the entire insulation system. HPS EnduraCoil complies with the new NRCan 2019 and DOE 2016 efficiency regulations and is approved by both UL and CSA standards. It is also seismic qualified per IBC 2012/ASCE 7-10/CBC 2013. Cast resin transformers are self-extinguishing in the unlikely event of fire, environmentally friendly and offer greater resistance to short circuits. HPS also offers wide range of accessories for transformer protection and monitoring requirements.