Danfoss MLX inverter series – The ultimate distributed inverter for cost optimizing medium- to large-scale PV systems

The MLX marks a completely new solution for distributed PV plants. Neither a string inverter nor a central inverter, it combines the best of both worlds and represents a novel approach to system setup. A truly international solution, the MLX is designed for medium- to large-scale commercial applications in multi-region grids and climates. Built to optimize output, an MLX-based solution is scalable, reliable, and simple to replicate across markets.

Easy to install - wherever


Compact and lightweight, the MLX delivers high yields and has no need for an inverter pad. The MLX can quickly be mounted directly on to PV-array racks. Designed for multi-region grids with 3-phase 208 Vac, 400 Vac, or 480 Vac grids of 50/60Hz, the MLX is ideal for multi-region installation. With an open communication interface based on industrial standards, the MLX is Sunspec Alliance compliant and easy to integrate into control and monitoring systems.

Supreme inverter efficiency

Optimized for 1000Voc DC layouts and with the need for DC-boosting eliminated, efficiency of over 98% is available. Three power sizes, 30, 45, and 60 kVA, will be available, and, depending on PV module architecture, the MLX-60 can handle up to 16 PV strings via an external string combiner.

Reduced total cost of ownership

The MLX is designed to offer a lean service model. Intelligent inverter monitoring enables easy and efficient troubleshooting. As with string inverters, the compact MLX allows for simple exchange-and-return service, eliminating the need for a maintenance contract. Standard off the shelf components and pre-built solutions can be used with the MLX. With the high-efficiency MLX in your system, you get the ultimate cost optimized inverter solution.

Featured Product

Sun Xtender® Deep Cycle AGM Batteries

Sun Xtender® Deep Cycle AGM Batteries

Sun Xtender® Deep Cycle AGM Batteries for renewable energy storage are manufactured in the USA by Concorde Battery Corporation and are built to the same demanding standards crucial to supporting the aircraft industry. To facilitate maximum conductivity & charge acceptance Sun Xtender® batteries are constructed with copper alloy corrosion free terminals & robust intercell connections. Endurance and optimal float life are achieved through plates thicker than the industry standard. Sun Xtender® Batteries' AGM maintenance free design is an ideal solution for off grid and grid tied systems.