NEW & IMPROVED! Regenerative Grid Simulator - Model 9410, from NH Research, Inc.

Regenerative Grid Simulator for the testing of EV Chargers, V2G, grid-tied inverters, & critical power systems.

IRVINE, Calif. - Aug. 2, 2016 - PRLog -- NH Research, Inc. (NHR) has released new advanced output control features, improved manual control interface, and comprehensive drivers for the popular Model 9410 Regenerative Grid Simulator. These new control features provide intuitive controls for simulating any abnormal AC-grid condition including: voltage harmonics, sags and swells, sub-cycle, full-cycle, and multi-cycle disturbances. It has never been easier for R&D to validate product designs or for manufacturing teams to ensure functional and regulatory compliance with EN 61000-x, IEEE 1547, UL 1741, CA Rule-21, LVRT, and similar emerging testing standards. Improvements have also been made to permit intuitive access to these new features through the full-featured manual control panels as well as through the fully-documented LabVIEW Compliant & IVI-C / IVI-COM compliant drivers.


The Model 9410 Regenerative Grid Simulator (http://nhresearch.com/landing/grid-simulation/) is a full featured, 4-quadrant, regenerative, rack-mountable, 12-kW grid simulator in only 15 ¾" (9U). Standard models include three (3) fully programmable channels allowing for any combination of DC as well as 1Φ, 2Φ, 3Φ AC outputs making it right-sized for testing Level 1 and Level 2 EV Chargers, EVSE systems, as well as V2G. When higher power is required. The modular design permits expansion in 12-kW increments meeting the needs for grid-tied solar inverters, ESS systems, exporting critical power systems (UPS), and similar AC grid-connected devices.

NHR will be exhibiting the Model 9410 Regenerative Grid Simulator along with NHR's 9200 Series DC Regenerative Test System (which is ideal for battery testing battery, simulating the DC-links, and emulating batteries) at The Battery Show (Novi, MI) from Sept. 13th-15th, 2016 in booth 1525. For more information or to see additional products offered by NHR, visit our website http://nhresearch.com.

Featured Product

Introducing RockIt Smart Slide

Introducing RockIt Smart Slide

Introducing RockIt Smart Slide - the ultimate solution for fast and easy installation of the rail-less RockIt racking system on composition shingle roofs. Smart Slide conforms to UL 441 and TAS 100 (A)-95 for wind and wind-driven rain, providing a super-strong watertight seal that is achieved through compression, in most cases without the need for additional sealant. The waterproofing sealant is embedded deep into the granules of the shingle, thanks to the integrated flexible foam layer that provides cushioning. This ensures a secure fit that conforms to any architectural-style shingle. With UltraGrip Technology™, you can rely on a secure installation, as it absorbs the movement created by thermal expansion and contraction. The pre-installed sealing pads are compatible with all composition shingle roofs, making it the ideal choice, even in ambient temperatures as low as 5 degrees.