-Gravity jacket concept for cost-efficient foundations -First offshore installation of SWT-7.0-154 wind turbine including 66kV transformer, cable and switchgear -Cable in pipe for cost-efficient cable systems
Four wind turbines and related equipment take a large step into the future of offshore wind technology: Nissum Bredning Vindmøllelaug and Jysk Energi placed the winning bid for Nissum Bredning Vind following a tender from Danish Energy Agency's (DEA) tender for the construction of the 28-megawatt pilot project in northern Denmark. The final investment decision has been made for the project, which includes important tests for future offshore wind technology: Siemens will not only supply its new 7-megawatt direct drive wind turbine, but also an innovative and cost efficient gravity jacket foundation solution, its new 66kV voltage solution including a new transformer, cable and switchgear systems, along with further innovations regarding tower and controller settings.
The four Siemens SWT-7.0-154 wind turbines will be grid connected using a new cable and turbine concept with a 66kV voltage. Siemens expects this to be the standard voltage for future offshore wind power plants. This higher voltage results in lower costs for cabling and lower losses. Additionally, cable in pipe solutions allow for simpler cables to potentially be used between turbines. Further material savings will be provided by the slender tower concept using prototypes of a new lightweight turbine tower especially suited for jacket foundations.
"We are proud to be part of Nissum Bredning Vind offshore wind power plant. Since the Danish Ministry of Energy tendered the project as an official test bed for new technologies and integrated design, we've looked forward to this exciting project," says Michael Hannibal, CEO Offshore at Siemens Wind Power and Renewables Division. "This gives us the opportunity to simultaneously test and promote our innovations to achieve further cost reductions in offshore wind."
Nissum Bredning Vind offshore wind power plant will get support by receiving a guaranteed feed-in tariff of DKK 0.7/kWh (EUR 0.09/kWh) for the initial 10 years for the first 50,000 full load hours of operation. Turbine installation is scheduled for summer 2017. Commissioning will be in the third quarter of next year.
This press release and a press picture is available at
For further information on Division Wind Power and Renewables, please see