NH Research, Inc. Releases 9300 Series High Voltage Battery Test System

NH Research, Inc. (NHR) has released the new 9300 series, a higher-voltage / higher-power version of its popular single-channel 9210 series battery test systems. The 9210 Series provided a 12kW power module operating at 40V, 120V, or 600V and which allowed paralleling with similar systems to increase the power, whereas the new 9300 system provides a 100kW power module with a software-selectable high voltage range (1200VDC / 167A) and high-current range (600VDC / 333A) allowing for efficient testing of single-voltage and double-voltage Electric vehicle (EV) batteries as well as high-voltage Energy Storage Systems (ESS) used in grid-tied applications.

NH Research, Inc. (NHR) has released the new 9300 series, a higher-voltage / higher-power version of its popular single-channel 9210 series battery test systems. The 9210 Series provided a 12kW power module operating at 40V, 120V, or 600V and which allowed paralleling with similar systems to increase the power, whereas the new 9300 system provides a 100kW power module with a software-selectable high voltage range (1200VDC / 167A) and high-current range (600VDC / 333A) allowing for efficient testing of single-voltage and double-voltage Electric vehicle (EV) batteries as well as high-voltage Energy Storage Systems (ESS) used in grid-tied applications.


The 9300 further extends NHR's family of high-power battery test and emulation capabilities which are
ideal for analyzing a battery performance under xEV drive cycles and grid-storage profiles such as PJM and time-shifting profiles. Like the successful 9200 and 9210 systems, the 9300 modules are independent allowing for testing of multiple batteries, each with a different test plan, power levels and start/stop times. When higher power is needed, the 9300 modules may be paralleled providing 200kW, 300kW or up to 1.2MW capability. This modular power capability allows a system to be sized to the power levels needed today while ensuring expansion capability should additional power be needed in the future.

The standard 9300 system is outfitted with an internal controller, system software and advanced touch panel for manual control. Through this interface the operator is able to create, run, monitor, chart and report UUT profiles without writing a single line of code. Alternatively, for complex test programs and for tests that require additional data acquisition hardware, users can employ either NH Research's Enerchron® test sequencer software, or their own custom LabVIEW or Python application using the supplied fully-documented drivers.

The system is highly efficient and regenerative returning more than 90 percent of the energy removed from a battery is returned as usable AC facility power. Regeneration lowers the total utility consumption of the facility, reduces the amount of generated waste-heat, provides a cooler work environment, reduces air conditioning loads and eliminates the need for elaborate water-cooling systems. The operating cost savings from using regeneration typically provides a return on investment within 1-2 years.

Contact NHR (http://nhresearch.com/nh-research-inc/contact-nh-research...) for further details on the High Voltage Battery Test System - 9300 Series (http://nhresearch.com/power-electronics-test-systems-and-...) and related battery, power electronic, or alternative energy testing solutions.

Featured Product

TRA SNOW AND SUN - SOLAR TILE MOUNT

TRA SNOW AND SUN - SOLAR TILE MOUNT

You haven't installed a tile mount that is easier to install than the Solar Tile Mount manufactured by TRA Snow and Sun. Solar Tile Mount is used on all tile roof profiles: flat, mid, and high. It is made in the USA of aluminum alloy for strength and excellent corrosion resistance. Solar Tile Mount is built to allow more ease in installation with more rise from the tile surface to the rail for better air flow below panels. The adjustable base is longer than most allowing attachment 6" to the left or right to have the bracket in the base of the pan of the tile and still fasten to the rafter. Solar Tile Mount is adjustable for counter batten systems from ¾" to 3". The horizontal rail is directly above base fasteners giving greater uplift resistance than any other system. For superior waterproofing apply TRA Snow and Sun's butyl backed VersaFlash aluminum flashing. No tile flashing is needed on top of the tile for greater labor and material cost savings.