Itek Energy Cuts the Ribbon at New Bellingham Facility

Itek Energy celebrated the grand opening of its new, 48,000 square-foot factory in Bellingham, WA on October 4th.

BELLINGHAM, WASHINGTON, UNITED STATES, October 6, 2017 -- With the Pacific Northwests solar community looking on, Itek Energys Founder John Flanagan cut the ribbon to the companys new 48,000 square-foot manufacturing facility in Bellingham.


Officials from both the City and the Port of Bellingham shared their excitement at this addition to Bellinghams downtown waterfront area. Bellinghams Mayor Kelli Linville was on hand to say a few words, as was Rob Fix, Executive for the Port of Bellingham.

"When we had our first meeting about the waterfront, this was the kind of business that we imagined would be down here," Mayor Linville said, "Homegrown, able to expand, and good for our environment and our green power." Mayor Linville also applauded the re-purposing of the old Georgia Pacific warehouse for Iteks new facility, and the fact that it will bring more jobs to Bellinghams downtown core. Rob Fix spoke for the Port of Bellingham to share their excitement at the success of this project.

Just before cutting the ribbon, Flanagan spoke to the crowd, thanking the City of Bellingham and Port of Bellingham for their collaboration on the project, and the solar installers—in Washington State and beyond—who support Iteks business. Flanagan also made a special point of thanking "Iteks hard-working employees, who made this transition possible."

Karl Unterschuetz, Director of Business Development for Itek Energy, led the crowd through a tour of the new facility. Unterschuetz pointed out that, with the increased capacity from the new factory, Itek is placed among the largest solar manufacturers in the United States. The new facility will have the ability to produce 150 megawatts a year, and Itek will also keep its existing facility in Bellinghams Irongate District, bringing Iteks total capacity to 210 megawatts per year.

With a whole new line of cutting-edge equipment, Iteks new factory produces high-power, five-busbar solar modules in both 60 and 72 cell, with a power range of 300-370 watts. Known for building quality solar products, Iteks unique vision of providing the United States with PV modules from high-tech, efficient factories placed close to local markets is well on its way to being fulfilled.

# # #
About Itek Energy
Itek Energy is an American solar manufacturer with factories in Washington and Minnesota. Itek takes pride in offering high-quality, assembled-in-America solar modules with an exemplary reliability record. Our experienced team shares a passion for solar energy and is committed to making a positive impact, providing access to clean solar energy.

Featured Product

RBI Solar - Dahlia Has You Covered

RBI Solar - Dahlia Has You Covered

What if you could maximize the Ground Coverage Ratio (GCR) on your next project and not have to worry about the complicated variables that come with a tracker system? With a low tilt and clearance design, Dahlia® has the highest GCR of any fixed-tilt system in the marketplace. The system is available in three tilt options (7.5, 10 and 12.5 degrees) and designed to accommodate any sized PV module. The lightweight system is engineered with fewer components, several of which are shipped to job sites pre-assembled. This design feature reduces freight costs and rapidly trims the amount of on-site installation time required to complete construction. Maximizing PV coverage on a site can lead to an increase of production, which creates greater financial return for project owners. Over 100 MW of Dahlia® projects have been deployed across the United States, in regions of variable snow and wind loads. How much can Dahlia® cover and save you on your next project?