Sendyne Introduces First Li-Ion Battery Simulation Tool That Can Predict Cell & Pack Behavior With an Accuracy Better Than 5%

CellMod Accelerates Design of Electric Vehicles and Energy Storage Systems

Sendyne Corp., the leader in sensing, modeling/simulation, and control products, announces the immediate availability of CellMod, the first Li-Ion battery simulation tool that can predict cell and pack behavior with an accuracy of better than 5% under a wide range of test conditions. The software includes Sendyne's Pseudo-2D compact physics-based Li-Ion battery cell model coupled with Sendyne's proprietary dtSolve™, a tool that executes several orders of magnitude faster than other commercially available numerical solvers. The software may be used as a standalone tool or can be integrated with other simulation packages for whole system co-simulation via the Functional Mockup Interface (FMI), an open standard supported by all major simulation platforms.

CellMod can be quickly adapted to represent any type of Li-Ion cells, from NMC and LMO to LFP and NCA, and all iterations of these cells. To achieve this, only a simple (non-proprietary) set of experimental data on the cell to be modeled is needed. Sendyne's tool kit, which includes state of the art parameter extraction, then creates a unique CellMod version for a specific cell. All unique CellMod versions are created under NDA.

Reduce Design Time and Cost

Currently deployed by a Tier-1 U.S. battery maker, CellMod's uses include battery cell rapid prototyping. This reduces design time and costs, as each cell design can first be tested using the model. Design makers can utilize the model to select cells and vendors based on how well candidate cells perform in particular applications.

Further, CellMod can help reduce cost, a major challenge to large scale battery adoption. The compact nature of the CellMod-dtSolve™ bundle allows it to be embedded on a microcontroller within a Battery Management System (BMS) for real time predictive control. For large-scale battery systems, such as those used by electric vehicles and energy storage systems, multiple instances of the model, equal to the number of cells in the pack, can run simultaneously in real time. Little computing power or memory is required. By replacing the typical empirical models/Kalman filters with a highly accurate model enabling true predicative control, pack safety can be greatly improved and costs due to over-design can be eliminated.

Unlike empirical models often used today, CellMod is a true physics-based model. It considers physical processes occurring inside the cells, such as diffusion in solids or, electrolytic solution, reaction kinetics, charge transport, heat transport, etc. Hence CellMod can predict future battery cell behavior with a high degree of accuracy.

For more information, contact Sendyne at info(at)sendyne(dot)com.

About Sendyne

Sendyne delivers key technologies for battery system management. These include: the SFP family of ICs and modules for precise current, voltage and temperature measurements with built-in Coulomb counting; dtSolve™, a small footprint, high speed model solver for embedded predictive control; and CellMod,—high-accuracy, physics-based battery cell and pack models.

Featured Product

Roof Tech – E Mount AIR

Roof Tech - E Mount AIR

The most compact versatile rail-less PV mounting system under the sun. Instead of placing solar panels on top of long rails, simply attach E Mount AIR to rafters or the roof decking. Once panels are fastened to the roof, the system array is electrically bonded. The result is a visually seamless PV installation that stands the test of time. - Truly "One With The Roof". - PE stamped cert. letters available, UL 2703 Classified, ASTM 2140 fully waterproof. The one and only with integrated flexible flashing certified by the ICC! All the best quality. Only from Roof Tech