How drones are helping design the solar power plants of the future

Katie Fehrenbacher for The Guardian:  At the edge of a plot of muddy farmland, a few miles down the road from the University of California at Davis, an engineer takes a few quick steps across crop rows and lets go of a three-foot drone. Within seconds, the device – which weighs less than 2lbs and carries a powerful camera – ascends hundreds of feet into the cold, clear, blue sky and begins to snap detailed photos of the ground far below, including a long row of large solar panels mounted on steel poles.

This flight is just a test, demonstrated by Kingsley Chen, the drone fleet coordinator for SunPower at the solar company’s research and development center, which is under construction and about a two-hour drive northeast of the San Francisco Bay Area. The drone will enable SunPower to survey a wide region and help design a solar power farm that can fit more solar panels on a piece of land, more quickly and for lower costs than it previously could.  Con'td...

Comments (0)

This post does not have any comments. Be the first to leave a comment below.


Post A Comment

You must be logged in before you can post a comment. Login now.

Featured Product

Parker KleenVent provides closed-loop solution for wind turbine cooling systems

Parker KleenVent provides closed-loop solution for wind turbine cooling systems

Many 1.5 MW wind turbines use traditional open-loop water/glycol cooling systems. Regular water evaporation in the reservoir elevates the mixture's viscosity, prohibiting cooling of the IGBT and associated critical controls, causing the wind turbine to overheat unless serviced, which in turn means turbine downtime and high maintenance costs. Parker's KleenVent Coolant Evaporation Inhibitor (KV-CEI) is a simple add-on to the legacy cooling system, that eliminates water evaporation in the coolant solution and stops the ingress of airborne contaminants, by enclosing the cooling loop. The KVCEI also removes the need for continuous coolant monitoring during the warm season. Traditional maintenance calls to replenish or rebalance the fluids, take the wind turbine and transformer offline, resulting in significant downtime and revenue loss. Parker's cooling system solution optimizes wind turbine uptime and revenue, reduces maintenance costs and increases overall efficiencies. For more details on the KleenVent solution, see: solutions.parker.com/AWEA2018 or visit booth #4244 at AWEA Windpower May 7-10 in Chicago