Floating Wind Plan Could Finally Crack California’s Offshore Market

James Temple for MIT Technology Review:  Three tapered smokestacks tower above Morro Bay’s otherwise idyllic harbor, offering what some residents see as a “three-fingered salute” to this pretty seaside town along California’s Central Coast.

The six-decade-old Dynegy natural-gas plant, which shut down in early 2014, continues to loom over the city because it would cost tens of millions to disassemble. But this relic of midcentury technology might also offer the key to a very different energy future. A Seattle startup has proposed what could be the world’s largest floating offshore wind farm on a site 33 miles northwest of Morro Bay, anchoring in place around 60 to 100 turbines capable of delivering as much as one gigawatt of electricity into California’s grid. The site was selected specifically because the project could plug into the retired plant’s high-capacity transmission line at an adjacent PG&E substation, powering homes and businesses up and down the state.

Until recently, offshore wind simply didn’t make economic sense along the West Coast, because the steep continental shelf makes it prohibitively expensive to build the normal underwater foundations. But the ability to erect increasingly large wind turbines on floating platforms has presented new possibilities, particularly in California, where state renewable-energy mandates must be met even if the electricity prices aren’t as cheap as fossil-fuel options.  Full Article:

Comments (0)

This post does not have any comments. Be the first to leave a comment below.


Post A Comment

You must be logged in before you can post a comment. Login now.

Featured Product

TRA SNOW AND SUN - SOLAR TILE MOUNT

TRA SNOW AND SUN - SOLAR TILE MOUNT

You haven't installed a tile mount that is easier to install than the Solar Tile Mount manufactured by TRA Snow and Sun. Solar Tile Mount is used on all tile roof profiles: flat, mid, and high. It is made in the USA of aluminum alloy for strength and excellent corrosion resistance. Solar Tile Mount is built to allow more ease in installation with more rise from the tile surface to the rail for better air flow below panels. The adjustable base is longer than most allowing attachment 6" to the left or right to have the bracket in the base of the pan of the tile and still fasten to the rafter. Solar Tile Mount is adjustable for counter batten systems from ¾" to 3". The horizontal rail is directly above base fasteners giving greater uplift resistance than any other system. For superior waterproofing apply TRA Snow and Sun's butyl backed VersaFlash aluminum flashing. No tile flashing is needed on top of the tile for greater labor and material cost savings.