AHR Expo 2013, Booth # 5219
EJOT Solar Fastening Systems, represented by ATF, Inc., introduces its new solution for three tab asphalt shingle roofs. The EJOT Solar Flashing has been developed and manufactured in the US and is available from stock from in Lincolnwood, IL and through many of EJOT's North American solar distributors.
The Renewable Energy Career Days bring employers and employees together
With a huge opportunity now open for PV in Saudi Arabia, efforts are underway to analyse the potential for integration between the technology and oil.
All eyes are on leading project developers as the global CSP community meets in Pretoria on 4-5 February.
Last week the CSP Today Global Tracker revealed that between now and early 2014 the total generation capacity of concentrated solar power in the United States will increase by more than 120%.
MCS-certified product now offered through Ecolution Renewables
The Ontario Clean Technology Alliance is at DistribuTECH, the utility industry's leading smart grid event, today. The Ontario Independent Electricity System Operator estimated that starting in 2012 $1.95 billion over five years is needed to enable the connection of distributed generation in Ontario.
PNE WIND UK was appointed as a preferred development partner
Non-Profit Development Organization Hires Dave Karpinski as VP of Operations
Introduced primarily to meet demand in the utilities sector, the innovative new AC high voltage capacitor range has been designed to operate continuously on 24kV medium voltage transmission lines, which can be adapted to carry high frequency communication signals.
CET Technology on board as German installation partner
New report outlines key considerations and best practices for smart grid consumer engagement
GSE Systems Introduces 3Di-TouchWall, Affordable Alternative to CAVE Simulation for Immersive 3D Training
"The application of true-to-life virtual environments connected to our high fidelity models is a strategic initiative of our company,"
Schneider Electric presents on the long term reliability and availability of solar inverter at RAMS® 2013
"Reliability, the key to a Better Bottom Line"
Records 11566 to 11580 of 21271
Solar & Wind - Featured Product
Many 1.5 MW wind turbines use traditional open-loop water/glycol cooling systems. Regular water evaporation in the reservoir elevates the mixture's viscosity, prohibiting cooling of the IGBT and associated critical controls, causing the wind turbine to overheat unless serviced, which in turn means turbine downtime and high maintenance costs. Parker's KleenVent Coolant Evaporation Inhibitor (KV-CEI) is a simple add-on to the legacy cooling system, that eliminates water evaporation in the coolant solution and stops the ingress of airborne contaminants, by enclosing the cooling loop. The KVCEI also removes the need for continuous coolant monitoring during the warm season. Traditional maintenance calls to replenish or rebalance the fluids, take the wind turbine and transformer offline, resulting in significant downtime and revenue loss. Parker's cooling system solution optimizes wind turbine uptime and revenue, reduces maintenance costs and increases overall efficiencies. For more details on the KleenVent solution, see: solutions.parker.com/AWEA2018 or visit booth #4244 at AWEA Windpower May 7-10 in Chicago