Harnessing solar power, on a small scale

No thicker than a piece of paper - because it practically is a piece of paper - a solar panel created by an MIT researcher can be shoved into a pocket or made into a paper airplane, and it will still create energy when exposed to sunlight. The trick is in the way it is made. The panel is printed like ink onto a sheet of paper. Even folded up like a letter, it retains its ability to convert light to electricity. With her colleagues, Karen Gleason, a professor of chemical engineering at the Massachusetts Institute of Technology, published a paper last week in the journal Advanced Materials, demonstrating how they created a solar panel by printing tiny, lightweight layers of electrodes and semiconductors on a piece of paper.

AltEnergyMag - 2011 InterSolar North America Report

Intersolar promotes the development of business opportunities throughout the North American solar industry. There are 800 exhibitors and 22,000 trade visitors expected at the 2011 exhibition, co-located with SEMICON West. The accompanying conference expects 1,600 attendees. Since its establishment in 2008, the exhibition and conference have developed into the premier platform for the solar industry in North America. Intersolar North America focuses on photovoltaic and solar thermal technology and has quickly established itself among manufacturers, suppliers, distributors and service providers as a vital international industry meeting point.

Electric Vehicle Market Expansion in China

China fully intends to make its automotive industry one of its pillar industries; and those who do business there must be ever mindful of that reality. China appears determined to segue from "Made In China" to "Made By China". The profundity of that change in preposition should resonate even among those doing well in China.

SunWave Technology

Smart Solar is highly distributed, large scale solar coupled with Smart Grid technology installed in partnership with utility companies. Smart Solar builds solar in a reliable and cost-effective way that mitigates challenges faced by traditional solar. Smart Solar is the best insurance for long-term grid stability.

States Drive Impressive Fuel Cell Growth

The fuel cell industry is still finding its foothold in the energy technology portfolio, but supportive state policies that help foster fuel cell installations, company relocations and growth will help keep the U.S. at the forefront of fuel cell commercialization for a wide variety of applications and power needs.

Assessment of wind resources will help onshore development to take off

Systematic wind mapping offers a standardised data foundation for regional planning, taking the identification of areas which are particularly suitable for wind-farm projects to a completely new level. At the same time, it supports investors, planners and operators in identifying attractive sites and estimating amortisation periods. The independent TÜV SÜD experts have long-standing international experience, supporting wind projects across the world from planning to construction and operation.

St. Louis County Missouri Parks & Recreation Dept begins incorporation of Solar Equipment

The four larger panels pictured, consist of two systems. Upon a closer look, an observer will notice that visually the system is divided up in to two pairs of collectors that have a slightly different appearance from one another. Of the two pairs, one pair creates hot water for the facility and the other pair creates warm air for the structure.

InterSolar North America 2011 - AltEnergyMag.com has all the News from the show

Intersolar North America - North America's Premier Exhibition and Conference for the Solar Industry Intersolar promotes the development of business opportunities throughout the North American solar industry. There are 800 exhibitors and 22,000 trade visitors expected at the 2011 exhibition, co-located with SEMICON West. The accompanying conference expects 1,600 attendees. Since its establishment in 2008, the exhibition and conference have developed into the premier platform for the solar industry in North America. Intersolar North America, focuses on photovoltaics and solar thermal technology and has quickly established itself among manufacturers, suppliers, distributors and service providers as a vital international industry meeting point. As a media partner AltEnergyMag.com is hosting a Special InterSolar newspage sponsored by Trojan Battery, Schneider Electric and CentroSolar. We invite all exhibitors and attendees to check out and submit all your Conference news here. Also, stay tuned for our InterSolar Conference report which will go online following the show.

Feds offer $105M loan guarantee for "Project Liberty" biofuel plant

Poet's so-called "Project Liberty" biofuel plant, which will use corn waste instead of edible corn, is getting some support from the U.S. government. On Thursday, the Department of Energy announced it will offer Poet a $105 million loan guarantee to build out Project Liberty in Iowa, which is supposed to eventually produce up to 25 million gallons of cellulosic ethanol per year. Through loan guarantees, the government promises to pay back loans if borrowers can't. In many cases, the government is providing the loans as well, via the Federal Financing Bank. The financial support could help Poet finally get Project Liberty into commercial-scale production, and the plant has been in the planning stages for years now. Poet initially was hoping to start building the plant in 2009 and operating it in 2011, and back in 2008, the company was aiming for the plant to eventually produce 125 million gallons of biofuel per year.

Clean-tech incubator gets down and dirty

BOSTON--An everyday office building doesn't quite work when you need to hammer out a prototype of a solar-powered chiller or an inflatable wind turbine. So a group of entrepreneurs here have created a hands-on workshop to bring their clean-energy ideas to life. Greentown Labs held its official opening last week, bringing fellow entrepreneurs, city officials including Boston Mayor Tom Menino, and investors looking to plug into the active clean-energy technology scene. About 40 people from 10 fledgling companies have moved into this former baker and confectioner's supply warehouse in South Boston with the hopes of finding more like-minded green-tech start-ups. Among the offerings was beer chilled by solar panels. Their work environment is definitely not class A office space. A disorderly room houses work areas shared among four or five companies. There is separate space for small offices and another with a lab table set aside for electronics testing. In the basement is a large machine shop where inventors can bang out their first prototypes.

Harnessing the Sun's Power

KUKA Systems North America has made a successful entry into the burgeoning Canadian solar panel manufacturing sector, demonstrating in the process how it can adapt its extensive suite of automated production solutions to a panel maker’s unique requirements. KUKA Systems provides photovoltaic panel manufacturers around the world with fully automated production lines or any level of automation short of that, from cell layout through all stages of module assembly and quality control, regardless of type or dimensions. For its first Canadian customer, KUKA Systems is installing three partially automated, post-lamination framing lines for trimming, framing, testing and packout of photovoltaic panels, a $12 million contract. Each line consists of five robots, as well as applicators, conveyors and other handling and testing equipment. Installation began in the first quarter of 2011.

European Emissions Trading System Phase III
A First Overview

Several positives resulting from the Phase 1 "learning by doing" exercise assisted the ETS in making the Phase 2 process run more smoothly, including: (1) greatly improving emissions data, (2) encouraging development of the Kyoto Protocol's project-based mechanisms

Solar Installation Education

PV is a proven technology, and the industry is growing at a very rapid pace. Training is essential, and NABCEP certification is driving the industry to a high standard. Train, obtain your certification, align yourself with a company that offers quality products, and stay abreast of new products, methods, processes and code changes.

Improving Conversion of Solar Leads:
Simple tips for installers to increase sales

For most solar companies, an increase in lead conversion by 1 percentage point would have the same impact on sales as increasing your lead volume by 10 - 20% or more. In this 4 part series, we'll cover simple tips for installers to improve lead conversion through each stage of the sales process.

Taking On Your Competitors in a Crowded Energy Market

Traditional and new marketing tools will help companies stay ahead of the curve, connect with their audience in a meaningful way, and stand out among competition to grow their business.

Records 1681 to 1695 of 2907

First | Previous | Next | Last

Featured Product

SolarRoofHook - Low Profile QuickBOLT

SolarRoofHook - Low Profile QuickBOLT

SolarRoofHook's Low Profile QuickBOLT with Microflashingâ„¢ is the industry's affordable, UL Certified Asphalt Shingle mounting system. The Microflashingâ„¢ is compressed by the collar on the bolt to create a water-tight seal. With an installation time of less than one minute, the Low Profile QuickBOLT allows installers to complete more jobs.