The Bifaciality of LONGi Solar's Bifacial PERC Cell Brakes World Record

The National Center of Supervision and Inspection on Solar Photovoltaic Products Quality (CPVT) issued an independent test report showing that LONGi Solar's bifacial PERC monocrystalline cells achieved a world record bifaciality of 82.15%.

New Fuel Cell Engine Facility Commissioned in Shanghai

•Shanghai Edrive, division of Broad-Ocean, is the first facility for Chinese produced Ballard fuel cell modules •Ceremony attended by the Honourable Catherine McKenna, Canada's Minister of Environment and Climate Change

Smart City-ready solar street lights in Tilburg

The future of the smart city can be found in the city of Tilburg, the Netherlands. This city now houses two of the most advanced solar-powered streetlights available on the market.

Natural Power completes ROC project no 8 for Airvolution Energy

Natural Power has completed due diligence on behalf of Airvolution Energy for its commissioning of Kinegar Wind Farm in the Scottish Borders, making it the eighth renewable obligation certificate and Feed in Tariff due diligence project delivered for Airvolution.

FUGRO WINS ØRSTED CONTRACTS FOR SITE INVESTIGATIONS AT TWO LARGE-SCALE U.S. OFFSHORE WIND PROJECTS

Fugro has been awarded contracts by Ørsted to undertake geotechnical investigations at two large-scale offshore wind development sites. Ørsted is pursuing the development of these two new projects - Bay State Wind, located 15 miles off the coast of Martha's Vineyard, Massachusetts and Ocean Wind, 10 miles off the New Jersey coast - to bring wind energy to American consumers and businesses.

Opus Materials Technologies secures Innovate UK funding to research low-surface energy coating technology for solar PV systems

Durable self-clean coating technology project set to address water wastage and world energy trilemma challenges

3D-MICROMAC IS MANUFACTURER OF CHOICE FOR LASER CONTACT OPENING SYSTEMS FOR PERC SOLAR CELL PRODUCTION AT HANWHA SOLARONE

Strategic order for microCELL OTF high-throughput, high-productivity laser systems strengthens 3D-Micromac's position in the Chinese PV market

Prysmian Group at Wind Europe Annual Event 2017

The Group is ready to launch a new monitoring and maintenance service for a complete and effective management of subsea cable faults Turn-key cable solutions, project engineering, state-of-the-art cable technologies and asset management services on display

Natural Power appoints Head of Offshore

Nancy McLean has been appointed to the role of Head of Offshore to lead Natural Power's offshore business and explore new opportunities both within the UK and internationally. Nancy previously held the role of Principal Environmental Consultant in Natural Power's Planning and Environment department and in her new position she will report directly to Pieter D'haen, Commercial Director.

Global solar capability, delivered locally - Solar Ireland 2017

Natural Power will be exhibiting at the Irish Solar Energy Association's Solar Ireland 2017 event at Croke Park, Dublin, on 28th and 29th November 2017.

Ministries, Biomass & Renewable Energy Producers Lead Discussions at Asia Renewables 2018

CMT's Asia Renewables 2018 - incorporating 2 tracks - 4th Biomass & Bioenergy Asia and Vietnam Renewable Power opens on 17-19 Jan in Ho Chi Minh City. The summit focuses on SE Asia's renewable energy projects, success stories, Vietnam's renewable power targets as well as the region's wood pellet production and supplies.

iSpin installed on entire ERG Power Generation 30 MW windfarm

ROMO Wind installed its patented wind measurement technology iSpin on 15 Vestas V80 2MW in Poggio Imperiale wind farm (Italy), owned by ERGPower Generation. The results of the measurements: an average yaw misalignment of over 8 degrees

"Refueling" of electric vehicles in "no time". Powerswap reveals news of their radical solution for charging electric vehicles.

Powerswap AB, a Swedish start-up, has revealed news of their radical solution for charging electric vehicles. Instead of connecting the cord and waiting for the car to be charged, the battery is replaced with the help of a robotic device in three minutes.

GLOBAL CLEAN ENERGY, QUARTERLY REPORT Ended Sept 30, 2017: 3rd Quarter Update

North American Market and Drivers In the U.S., the field of waste management is becoming more closely aligned with resource management, and this is in large part because the way we view "waste" is dramatically shifting. New technologies are being developed that allow more materials to be recovered and new value created from those materials. Much more of our waste stream is considered to be valuable scrap material and new technologies such as automation for materials separation are allowing the industry to tap into these resources and create value out of what was previously considered non-valuable material. Conversion technologies, specifically those designed for plastics and tires, offer the same potential to create value for landfills. Tires to Fuel (TtF) technologies offer the potential to manage landfill-bound tires as a resource to create a valuable alternative fuel source. At this time, a large portion of the tire and plastic waste streams is still treated as "waste," and there is a large opportunity to recover more of the tires and plastics used in the United States.

DISTRIBUTED ENERGY RESOURCES: CONSUMERS ARE JUST STARTING TO BUY IN, BUT INTEREST IS HIGH

In a recent survey aimed at energy industry professionals and consumers conducted by the Association of Energy Services Professionals (AESP) and Essense Partners, a little less than a third of all consumers reported owning one of several forms of distributed energy resources: an electric car or plug-in hybrid electric car, a rooftop solar system, a backup generator, and/or a heat pump water heater.

Records 196 to 210 of 19219

First | Previous | Next | Last

Featured Product

Sierra Instruments, Inc.- InnovaMass. Reinvented.

Sierra Instruments, Inc.- InnovaMass. Reinvented.

Sierra was the first to introduce a combination volumetric vortex and multivariable mass flow meter in 1997. Today, Sierra's completely redesigned InnovaMass® iSeries™ 240i/241i builds on two decades of success measuring five process variables for gas, liquid and steam with one connection. Now, with the latest hyper-fast microprocessors, robust software applications, field diagnostic and adjustment capability, and a new state-of-the-art flow calibration facility, Sierra's vortex iSeries delivers precision, performance, and application flexibility never before possible.