Solar electric systems have high up front costs. Before going solar electric, you should conserve as much energy as possible so that your solar system can be smaller. Here are some tips on conserving electrical energy.
Steam, as with other forms of alternate energy has it's realm. Where steam excels above the other common systems, is in an application that requires large quantities of controllable, useable heat.
Maximum Power Point Tracking, frequently referred to as MPPT, is an electronic system that operates the Photovoltaic (PV) modules in a manner that allows the modules to produce all the power they are capable of.
The design is simple yet truly effective in offering to the building owner an aesthetically pleasing, lightweight photovoltaic roofing system that rests on flat or low slope roofs, requires no roof penetrations, protects roofs from weather and UV radiation and produces cost effective solar electric energy.
For emergencies there are all sorts of hand crank lights, solar flashlights, and low power LED flashlights. There's even a "shake-up" flashlight that uses a shaking motion of the hand to produce the needed power.
Power Energy Fuels, Inc. (PEFI) has the opportunity to assist the US Forest Service in converting forest residual (wood waste) into a useful commercial product.
Embracing change is the answer! As a nation, we need to look at this as an opportunity rather than an obstacle. This attitude and approach will lower our cost of living while creating a new market opportunity for green technologies. This opportunity can lead us to new industries and new jobs carrying our economy forward into a future world where we have learned to optimize, to adapt and overcome.
As compared with passive switchable glazing technologies such as photochromic or thermochromic -- which merely react to environmental conditions such as ultraviolet radiation or temperature -- SPD technology offers the user control over the amount of light transmission and much faster switching speeds.
To make the motorized registers, I'm using standard units purchased at a local hardware superstore, and the small servo motors were purchased from a local hobby shop that deals in Remote Control cars, planes and boats. All that's needed is a simple circuit to control them.
Ideally, a home energy controller would be programmed to calculate when loads should be turned on or off. It should also be designed to look at alternate solutions such as closing the window blinds before turning on the air conditioner to cool a room. The controller has to strike a balance between energy savings and comfort and convenience to the homeowner. The system should be almost invisible to the homeowner. If it isn't, it will soon be disabled.
The EMi thermostat is connected to an external modem that accesses the Internet via the regular telephone supply of a home or small business customer. When the utility company wishes to initiate a supply curtailment, it sends a call to the modem using a distinctive ring pattern that will activate the modem. The modem then calls a central utility curtailment dispatch station, from where it downloads the new settings to the thermostat.
In a survey of high-end entertainment households, when asked about the usefulness and interest of PC-based control services, respondents ranked energy management as the most attractive service option with 54% indicating that they had a strong interest in such a service. Utilities are aware and energized by this new demand, and as telemetry services become more widely available, Parks Associates believes consumers will be receptive to such services.
A commercial business owner in Southern CA, utilizing several stores in a strip mall, is currently paying $2,500.00 per month for electricity. He/she is being warned of a 78% increase by 2002, which would put his/her costs at $4,450.00 per month. This considerable increase in overhead will spawn a definite increase in his/her products and services to customers. In order to remain competitive, a business owner will be forced to find solutions to save energy on a long term basis.
Records 2911 to 2923 of 2923
Baja Carports offers an extensive solar support system product line customized to customers' site specifications by in-house engineers, meeting their parking lot coverage, plus optimal PV production needs. Baja's Full Cantilever Tee is often paired with its Semi and Full Cantilever carports to meet live/loads up to 60psf and wind speeds to 160mph. All Baja products are pre-fabricated, bolted connections, pre-galvanized structural steel for fast on-site installation and project aesthetic requirements."