Perovskite solar cells hold much promise for cost-effective solar energy. However, heat stability is an issue, and can significantly limit the solar cell’s long-term efficiency. A team of scientists led by Michael Grätzel’s lab at EPFL has now developed a cesium-containing perovskite solar cell that has achieved efficiency of 21.1%, as well as record-level reproducibility. The work is published in Energy and Environmental Science. By adding cesium, the EPFL scientists, led by postdoc Michael Saliba, made the first ever triple-cation perovskite mixture (Cs/MA/FA). The new films are more heat-stable and less affected by fluctuating surrounding variables such as temperature, solvent vapors or the heating protocol used for the device. But more importantly, they also show stabilized power-conversion efficiencies of 21.1% and outputs at 18% under operational conditions, even after 250 hours. “This is an absolute breakthrough,” says Michael Saliba. “These properties are crucial for commercializing perovskite photovoltaics, especially since reproducibility and stability are the main requirements for cost-effective large-scale manufacturing of perovskite solar cells.” Source AZOCleantech...
Magnetrons will eventually be replaced by solid-state RF power amplifier modules and controllers within the following applications: industrial heating and drying, plasma generation, chemical processing, commercial cooking (restaurants, fast re-heat and thawing) and, last but not least, consumer microwave ovens.
The U.S. Society of Automotive Engineers (SAE) and the International Electrotechnical Committee (IEC) are proposing to develop standardized labels that are color-coded to allow for better identification between lead-acid and lithium-ion batteries.
Chelsea Harvey for The Washington Post: On Friday, United Airlines will launch a new initiative that uses biofuel to help power flights running between Los Angeles and San Francisco, with eventual plans to expand to all flights operating out of LAX. It's the first time an American airline will begin using renewable fuel for regular commercial operations, and the occasion is part of a bigger movement when it comes to clean transportation in the U.S. The renewable fuel used to power United's planes will be coming from a Los Angeles refinery operated by AltAir Fuels, which is using the facility to produce both renewable jet fuel and diesel fuel using a technology developed by Honeywell UOP, a major supplier and technology licenser in the petroleum industry. Back in 2013, AltAir and United announced their partnership, in which United will purchase up to 15 million gallons of biofuel over a three-year period. Friday's launch will be the first application of that agreement. The flights will use a mixture of 30 percent biofuel and 70 percent traditional fuel, and United says that the biofuel will help reduce greenhouse gas emissions by about 60 percent compared with regular fuel. Cont'd...
In general, the installer just removes the roof piece, locates the rafters, drills pilot holes, fastens the product to the rafter, properly seals the penetration, and grinds the tile where the mount is located before placing the roof piece back over or around the mount.
Managing fluids at high temperatures presents a safety hazard as the fluid may come into contact with the engineer whilst the fluid is being sampled
Melwood partnered with Standard Solar to build a 413.8 kW rooftop system on its Horticulture Training Center, along with a 517.1 kW carport system (930 kW total), which will provide 95 percent of the center's energy needs.
India must look beyond its current state towards the type of country it hopes to become, and must find a balance between increasing wealth and prosperity, acceptable mobility and access, and low emission levels.
The following nations have, at one point or another, broken global records in renewable energy use, production or technology development.
The most popular fluid used in CSP plants is the eutectic mixture of BDO. This fluid has a high operating temperature (up to 400 degrees Celsius), a low viscosity and good thermal stability.
Recently, there have been many boosting developments in the conception of new methodologies for generating hydrogen for fuel cells without resorting to fossil fuel as support.
Utilities are turning to energy storage systems (ESS) to help power grids withstand the effects of high peak demands, instability and the unpredictability of energy that can be gone with the wind.
Monumental Market Conditions Revealed as First Mexican Clean Energy Capacity Auction Prequalification Bid Window Closes
The first auction price bids are due in March, and prequalification for the second renewable auction in Mexico is expected to take place in as early as May or June.
So far IWS technology has been installed in multi-unit residential developments, wastewater treatment facilities, a public theatre and a university campus.
Barbara Haislip for the Wall Street Journal: Few industries are more daunting for entrepreneurs these days than clean energy. Developing the technology and hardware is expensive, and setbacks are common. Even if all goes well, getting a product to market can take a decade or more. Most venture-fund investors, meanwhile, want a quicker payout. Danielle Fong, co-founder and chief scientist of LightSail Energy, is trying to keep investors happy while working toward some ambitious clean-energy goals. Her company’s aim, she says, “is to produce the world’s cleanest and most economical energy-storage system” through a technology that uses compressed air to store energy from the grid. LightSail’s technology will do this more efficiently than other solutions, Ms. Fong says, by capturing some of the excess heat that comes when compressing air. “Until now, this was wasted, reducing efficiency,” she says. Founded in 2009, Berkeley, Calif.-based LightSail has raised $70 million from several investors, including Bill Gates, Peter Thiel,Khosla Ventures and the French energy giant Total. Cont'd...
Records 391 to 405 of 2895
SolarRoofHook's Low Profile QuickBOLT with Microflashing™ is the industry's affordable, UL Certified Asphalt Shingle mounting system. The Microflashing™ is compressed by the collar on the bolt to create a water-tight seal. With an installation time of less than one minute, the Low Profile QuickBOLT allows installers to complete more jobs.