Case Study - TrueString Inverters Save $ for Machine Shop

We asked one customer to model cost savings for us. Note that we didnt pay for this, and it was based on a real bid made in 2015.

Case Study: Solar Project Powers Empowerment For The Disabled

Melwood partnered with Standard Solar to build a 413.8 kW rooftop system on its Horticulture Training Center, along with a 517.1 kW carport system (930 kW total), which will provide 95 percent of the centers energy needs.

FastRack 510 Installed on VA Caribbean Medical Center in Puerto Rico

Sollega supplied their FastRack 510 ballasted mounting system for the installation of a 645 kW rooftop solar array at San Juan, Puerto Rico Caribbean VA Hospital.

Hawaii's Oldest Country Club Gets a New Source of Power

The one-piece FR510 requires no assembly, and its universal design allowed HEC to install two different models of PV modules, with the same simple and intuitive installation procedure.

Solar Panels Bring Light To 'Devon Darkness' Ale

Energy monitoring helps match brewerys requirements to ideal solar system.

ReneSola Sells 34.6 MW Utility Scale Project in the UK

This represents ReneSola's second project sale to Foresight Group.

FastRack510 Installed at Hawaii's Largest Airports

The airports are not only in hurricane prone regions, but also in areas of high seismic activity. The minimal seismic anchors were installed at a rate of up to five per man hour.

Case Study: City Wastewater Treatment Plant, Pocomoke City, MD

Friendliest City On The Eastern Shore Is Environmentally Friendly, Too

Kyocera's "Green Curtains" of Foliage Help Company Conserve Energy

Green Curtains help combat climate change by reducing office temperatures and energy use, encourage employee involvement in environmental efforts and can add an interesting harvest to the employee cafeteria!

Records 46 to 54 of 54

First | Previous

Featured Product

POWER MAX™ Ballasted Roof Mounting System

POWER MAX™ Ballasted Roof Mounting System

Preformed Line Products introduces the POWER MAX Ballasted Roof Mounting System. The POWER MAX solar mounting system is engineered to maximize energy output on commercial flat roofs. Developed with the professional installer in mind, this system offers adjustable inter-row spacing in the field of up to 11 inches. It features 50% fewer components and a simplified design resulting in faster assembly rates and labor savings on every project. Available in a flush mount, 5˚ or 10˚ tilt or higher density dual tilt design, the POWER MAX base arrives stacked on pallets providing easier transport to the roof. Engineered as a fully ballasted, non-penetrating system, it accepts standard concrete blocks and is qualified by wind tunnel testing.