ENRGi was formed to bring the energy and costs savings of geothermal heating and cooling to residential and commercial buildings in the northern New Jersey area. Unlike most contractors that can install this equipment, we focus solely on geothermal environmental controls. In addition to having certification from the IGSHPA (International Ground Source Heat Pump Association), ENRGi also hosts educational seminars on the benefits of geothermal technology for the public.

AltEnergyMag Interview - Geothermal Heating and Cooling

David Goldsholl | ENRGI


1) What does a geothermal heating & cooling system consist of and how does it work?
Your property can be an energy source for heating and cooling for your home, school or commercial building.  The ground temperatures remain the same year round at 54 degrees.  That’s because the earth absorbs 47 percent of all the heat energy that reaches its surface from the sun.  A geothermal system circulates a water-based solution through a buried loop system to take advantage of these constant temperatures.  During the heating season, the fluid circulates through the loop, extracting heat from the ground, the heat energy is then transferred to the geothermal unit.  The unit compresses the extracted heat to a high temperature and delivers it to your air conditioning duct system or radiant heat system.  For cooling, the process is simply reversed.
 
2) How much does a GHC system get in tax credits? 
The federal Government is giving a 30% tax credit for complete cost of system for residential.
To see complete list for commercial visit www.dsireusa.org
 
3) How fast is payback on a GHC system in new home?
Since GHC saves homeowners 70% in heating & cooling expenses every year, payback period could be 0-2 years depending on what size home & what type of system installed.
 
4) Are there special conditions need to install a GHC system for a home?
If home has ductwork installed it will make cost to install less. GHC works though ductwork & radiant piping.
 
5) Does GHC reduce greenhouse gas & pollution?
Yes there is no carbon monoxide in home from GHC, no chimney & less pollution.
 
6) How long has GHC been around?
GHC has been around for over 30 years getting better every year. The Midwest has used GHC longer than other places, the last few years the east coast has finally caught on.
 
7) What is the quality of air with GHC?
Better, no dry air. GHC heats the air up to 120 degrees; your typical heating system fries your air to 160 degrees that is why your sinuses get dried out.
 
8) Where is GHC made?
GHC is made in America. America is the largest manufacture of GHC; we actually ship to other countries more than they ship to America. Creating American jobs.
 
9) Is GHC safe?
Yes the safest heating & cooling system you can install. NO carbon monoxide produced in your home, no open flame & no chance of fire. Energy from the earth.
 
10) What's in store for the GHC market in the future?
GHC sales have been doubling during this current recession, while every other area is getting hammered.

 

ENRGi combines its thirty years of experience in commercial and residential construction with the most experienced industry partners – engineering and drilling companies that have been leaders in the Geothermal heating and cooling field for over twenty years.  These unique skills allow us to design, procure, install and maintain complete systems, and make sure they are operating correctly.

Comments (0)

This post does not have any comments. Be the first to leave a comment below.


Post A Comment

You must be logged in before you can post a comment. Login now.

Featured Product

Parker Wind Power Solutions - Core technologies to help you harness the wind… onshore and offshore

Parker Wind Power Solutions - Core technologies to help you harness the wind… onshore and offshore

Visit Booth #2886 at AWEA Windpower, May 22-25 in Anaheim, CA to see how Parker products, systems and services help you raise performance while reducing risk in wind energy environments. Parker has been on the forefront of windpower for over two decades, with solutions that touch virtually every critical function in the turbine. From integrated lube oil filtration systems and sealing technologies that make drive trains more reliable and bearings operate like new to compact blade pitch actuation systems that maximize rotor efficiency and minimize vibrations in the turbine. Parker has the solutions that make today's advanced and sophisticated wind power plants better and smarter. Case in point? Our high efficiency power conversion systems that deliver optimum power to the grid. While our scalable evaporative cooling system lowers overall system cost with up to 40% higher power throughput.