ARCA® ENCLOSURES ACHIEVE CE CONFORMITY CERTIFICATION

The ARCA® JIC enclosure family, from Fibox, has been tested and certified by SGS FIMKO to comply with the European Community's Low Voltage Directive and permits use of the CE Mark.

Glen Burnie, MARYLAND, JANUARY 6, 2009. The ARCA® JIC enclosure family, from Fibox, has been tested and certified by SGS FIMKO to comply with the European Community's Low Voltage Directive and permits use of the CE Mark. The CE Mark is recognized worldwide and CE Conformity is required for importation of electrical equipment into the European Community. ARCA enclosures were evaluated against EN 60529 and EN 62262, achieving ingress ratings of IP66 / IP67 and an impact rating of IK09. ARCA enclosures were also evaluated for mechanical strength (EN 60439-4) and conformity to Low Voltage Switchgear requirements (EN 62208). In addition, ARCA enclosures are UL Listed and NEMA rated Type 4, 4X, 12, and 13.


The ARCA enclosure line consists of 10 standard JIC enclosure sizes ranging from 6 x 6 x 4" D to 18 x 16 x 10" D and is available in over 100 configurations of opaque or transparent screw cover or hinged latched cover versions. This size range targets OEM instrumentation, controls, and automation applications, and accommodates larger components and high power applications.

Stylized ARCA enclosures, manufactured using injection-molded polycarbonate, a high performance plastic, provide ease of customization, robustness, superior chemical resistance, and wide temperature range. ARCA enclosures protect electrical and electronic equipment in industrial applications including chemical manufacturing, pulp and paper manufacturing, wastewater treatment systems, clean energy including wind and solar, and hostile indoor and outdoor environments.

To receive free ARCA literature, call TOLL-FREE: 888/342-6987, FAX: 410/760-8686,

Featured Product

GreenFasten™ solar panel roof mount hardware, watertight, USA made

GreenFasten™ solar panel roof mount hardware, watertight, USA made

The GreenFasten™ - GF1 system utilizes the patented watertight technology EcoFasten Solar® is known for. The flashing is fit with our EPDM rubber bushing and when used with a compatible EcoFasten Solar compression bracket (milled with countersink), a watertight seal is created, which protects the integrity of the roof. Requiring just a single fastener (lag bolt or self-drilling), GreenFasten provides the fastest install in the industry and will not void roofing manufacturer's warranties. Backed by IAPMO certification, GreenFasten delivers a mounting solution for all new or existing (retrofit) composition shingle roofs, and is the most cost-effective solution available. Like all of the solar roof mount solutions in our line of products, GreenFasten is made in the USA using recycled materials.