Hybrid Solar Electric (PV) - Thermal (Heat) Power System

SolarRoofs.com's Current Product Design Proves to be Ideal for Hybrid

"After 30 years in solar thermal, I have a few tricks up my sleeve and am excited to be making another contribution to solar energy, and this one is mostly just a simple modification of our highly flexible collector design. People can immediately understand the value of Hybrid PV-Thermal," according to creator, Al Rich.

For years SolarRoofs.com has produced a popular lightweight and attractive collector called the "Skyline" 10-01 and 20-01. Recently the Inventor of the collector, Al C. Rich, of Carmichael, CA, an innovation leader in the solar water heating and PV industry, realized the unique roll formed pan design would make an ideal air collector. Having also built air collectors in the past, Rich said "it wasn't much of a leap to put two and two together and see that by simply substituting a PV panel as the glazing, our air collector would become an excellent Hybrid PV-Thermal collector." Now Rich is seeking funding to modify the "Skyline" collector to be a Hybrid.

"I have been toying with PV-Thermal Hybrids since 2001 when we built our first one. Being a thermal guy I thought that the heat developed was not enough, so I scrapped it, now I realize that the heat was as much or more energy than the PV panel would produce plus there are other benefits," Rich said.

The value of this technological approach has been recognized by no less than Vinod Khosler, the founder of Sun Microsystems who is now an alternative-energy technology entrepreneur. He called this hybrid approach "a gargantuan leap in a field where engineers exult over the most incremental gains."

On its own, Solar Thermal usually produces over 4 times the energy of PV in thermal terms. A thermal collector covered with PV is going to work at lower efficiency, because most of the direct sunlight is blocked. If the thermal portion of the Hybrid collector is working at 25% efficiency, the gross energy output would be doubled. Now add to that increased PV panel efficiency and decreased cooling load and you have a real winning combination.

PV-Thermal hybrids have recently become popular because these systems make more effective use of valuable solar roof space. The Hybrid collector effectively more than doubles the per square foot power output of PV alone. This is done by producing heat for hot water or space heating as a byproduct, in effect, a solar co-generation process.

Visit: www.solarroofs.com for more information, or call 916-481-7200.

Featured Product

WS510 Secondary Standard

WS510 Secondary Standard

In the monitoring of large photovoltaic (Utility Scale), in assessing potential sites (Solar-assessment), or in up and coming electricity cost saving initiatives projects (Commercial & Industrial), the WS510 now provides the market a secondary standard pyranometer, ultrasonic wind speed, ultrasonic wind direction, temperature, pressure and humidity all in a single unit.. This sensor meets the high demands of the world meteorological organization (WMO) through the active valving at air temperature measurement and the inertia- and maintenance-free measurement of wind speed and wind direction on the ultrasonic principle. Equipped with a Kipp & Zonen pyranometer of the secondary standards, the WS510-UMB Compact weather sensor from Lufft unites the precision of a variety of meteorological individual sensors in a single all-in-one device, for the first time.