Hurricane Wind Power line wind generators utilizing new high efficiency patented technology

Hurricane Wind Power LLC of Virginia releases highest efficiency generator head on market for home wind generator building.

Hurricane Wind Power LLC of Virginia in response to much consumer interest is releasing a new Permanent Magnet Alternator that is highly efficient. This product is targeted for the do -it-your-self builder of wind generators. This product in testing has outperformed ever other generator head on the market. The new product improves on existing designs by utilizing double stator patented technology with a non iron stator core that makes this a truly revolutionary product. This configuration allows the unit to increase the magnetic force within the alternator utilized to create power while decreasing the torque need to "break the unit loose" and get it spinning. This is due to the lower magnetic adhesion within the unit made possible by eliminating the iron core within the stator. The result is our product turns in low wind situations and start charging battery banks at never before heard of wind speeds and RPM levels. In testing we were able to charge twelve volt battery banks in as low as four mph winds.

The line is made up of three categories of generators all made in the USA.. One of which has a double stator patented technology and can start charging a twelve volt battery bank at as low as forty RPM and in wind speeds as low as 4 mph. This is significantly lower wind than the products currently on the market perform at and should pump life back into a market that has been down recently due to the scarcity of the "ametek" line of DC motors that wind enthusiasts have used to build wind generators at home in the past. The other two generators are single permanent magnet alternators that are both low wind units that start charging twelve volt systems with as low as eighty RPM
All of the products in the new line are brushless and require very low maintenance . These units will be available for the consumer in Mid December and can be paired with the ultra high efficiency blades being offered for the new units that maximize torque, hubs and the wind turbine bodies. They can be purchase as part of a kit or used to be incorporated within the design of the Home wind generator plan of the do it your selfer.

Featured Product



You haven't installed a tile mount that is easier to install than the Solar Tile Mount manufactured by TRA Snow and Sun. Solar Tile Mount is used on all tile roof profiles: flat, mid, and high. It is made in the USA of aluminum alloy for strength and excellent corrosion resistance. Solar Tile Mount is built to allow more ease in installation with more rise from the tile surface to the rail for better air flow below panels. The adjustable base is longer than most allowing attachment 6" to the left or right to have the bracket in the base of the pan of the tile and still fasten to the rafter. Solar Tile Mount is adjustable for counter batten systems from ¾" to 3". The horizontal rail is directly above base fasteners giving greater uplift resistance than any other system. For superior waterproofing apply TRA Snow and Sun's butyl backed VersaFlash aluminum flashing. No tile flashing is needed on top of the tile for greater labor and material cost savings.