NEW SERIES OF PHOTOVOLTAIC MODULES H3A 214-235 P WITH 3 BUS BARS

Helios Technology, Italian leaders in the production of photovoltaic modules and cells, can boast 30 years of experience and a constant commitment to innovation and improving product performance. Now proudly presenting the new series of photovoltaic modules H3A 214-235 P with 3 bus bars.

Carmignano di Brenta (Padua, Italy). With the new series of photovoltaic modules H3A 214-235 P featuring 3 bus bars, Helios Technology (part of the Kerself Group) reconfirms their true vocation for innovation. Developed using highly efficient polycrystalline silicon cells manufactured in Italy by the same Padua-based company, the new series shows a significant increase in average module output power, thanks to the use of the 3 bus bars. The H3A 214-235 P also provides an excellent spectrum response in a very wide band of solar radiation frequency, according to the tests certified by the Fraunhofer Institut Solare Energiesysteme (ISE). It is subjected to a great many, very strict quality controls throughout the entire production process. New production techniques and an innovative, more hardwearing and compact anodised aluminium frame mean that this new design has significantly reduced laminate dimensions: the module now takes up an area of just 1.63 m². The modules are thus compact and very light (weighing a mere 18.7 kg), making their installation in even limited spaces, simple. The front glass is just 3.2 mm thick and is resistant both to the impact of hailstones and to the most common atmospheric agents. Additionally, in order to reduce light reflections to a minimum and obtain better transmittance, the glass is now textured. These features allow for the supply of powers ranging from 214 to 235 Wp, with greater conversion efficiency. The raw materials (glass: AGC-Bel; cells: HELIOS TECHNOLOGY-Ita; eva: STRE-Spa, ETIMEX-Germ; bs: COVEME-Ita, MADICO-Us) are all certified and extremely high quality, making this series an internationally-recognised excellent product guaranteed for more than 25 years. Certifications IEC EN 61215 (2006) and IEC EN 61730-1-2 (2007) confirm and certify the high all-Italian manufacturing quality of this excellent product.



Press Office:
Laura Ceccon - Quid Communication - Vicenza, Italy
Ph +39 0444 512733 - mob. +39 347 3775409
laura@quidonline.it - www.quidonline.it

Featured Product

GreenFasten™ solar panel roof mount hardware, watertight, USA made

GreenFasten™ solar panel roof mount hardware, watertight, USA made

The GreenFasten™ - GF1 system utilizes the patented watertight technology EcoFasten Solar® is known for. The flashing is fit with our EPDM rubber bushing and when used with a compatible EcoFasten Solar compression bracket (milled with countersink), a watertight seal is created, which protects the integrity of the roof. Requiring just a single fastener (lag bolt or self-drilling), GreenFasten provides the fastest install in the industry and will not void roofing manufacturer's warranties. Backed by IAPMO certification, GreenFasten delivers a mounting solution for all new or existing (retrofit) composition shingle roofs, and is the most cost-effective solution available. Like all of the solar roof mount solutions in our line of products, GreenFasten is made in the USA using recycled materials.