Stahlin Non-Metallic Enclosures Website Section Features New 10 Year Product Warranty!

Stahlin Non-Metallic Enclosures Website Section Features New 10 Year Product Warranty! Environmental damage to connections, controls and instrumentation essential to applications can be reduced or eliminated by choosing the correct non-metallic enclosure

Stahlin Non-Metallic Enclosures Website Section Features New 10 Year Product Warranty! Environmental damage to connections, controls and instrumentation essential to applications can be reduced or eliminated by choosing the correct non-metallic enclosure. Because Stahlin composite enclosures can provide durable long-term protection, the company has announced that its product warranty free of failure due to manufacturer defects has been extended to a full decade through its SUN-UP-TO-SUN-DOWN 10 YEAR PRODUCT WARRANTY. Stahlin's ten year warranty makes it the only enclosure manufacturer to offer assurances of that duration.


Educating other about the benefits of non-metallic enclosures has always been an essential focus for Stahlin. As a result, the company has created a new website section for anyone who wants learn more about this warranty at: http://www.stahlin.com/Warranty.cfm

All Stahlin non-metallic enclosures are protected by patented SolarGuard® --- a unique material formulation that provides superior molded-in UV-resistance, requires no field maintenance, and is provided at no additional product cost. In extensive comparison testing, SolarGuard® outperformed all other available SMC formulations by as much as 60% in its ability to retain gloss and color after exposure to concentrated UV light.

Stahlin enclosures are rugged non-metallic composites and not molded thermoplastics. Consequently. Stahlin enclosures provide superior dimensional stability because of low coefficient of thermal expansion versus stainless steel. While tensile strength is high with metal enclosures, flexural strength (the material's ability to withstand denting) is relatively low. While that is desirable for forming operations, it is less than desirable in the finished product. Once metal has gone beyond its elastic limit it has created a potential leak path that could compromise an enclosure's seal integrity. Composite fiberglass materials offer a significant advantage over metallic alternatives in improved flexural strength because they can withstand an impact without permanent deformation or denting.

For more information on Stahlin: www.stahlin.com

Featured Product

TRA SNOW AND SUN - SOLAR TILE MOUNT

TRA SNOW AND SUN - SOLAR TILE MOUNT

You haven't installed a tile mount that is easier to install than the Solar Tile Mount manufactured by TRA Snow and Sun. Solar Tile Mount is used on all tile roof profiles: flat, mid, and high. It is made in the USA of aluminum alloy for strength and excellent corrosion resistance. Solar Tile Mount is built to allow more ease in installation with more rise from the tile surface to the rail for better air flow below panels. The adjustable base is longer than most allowing attachment 6" to the left or right to have the bracket in the base of the pan of the tile and still fasten to the rafter. Solar Tile Mount is adjustable for counter batten systems from ¾" to 3". The horizontal rail is directly above base fasteners giving greater uplift resistance than any other system. For superior waterproofing apply TRA Snow and Sun's butyl backed VersaFlash aluminum flashing. No tile flashing is needed on top of the tile for greater labor and material cost savings.