RENEWABLE ENERGY PROVIDES HALF OF ALL NEW U.S. ELECTRICAL GENERATING CAPACITY IN 2012

Renewable sources now account for 15.40% of total installed U.S. operating generating capacity.

Washington DC – According to the latest "Energy Infrastructure Update" report from the Federal Energy Regulatory Commission's Office of Energy Projects, renewable energy sources (i.e., biomass, geothermal, solar, water, wind) accounted for 49.10% of all new domestic electrical generating capacity installed in the twelve months of 2012 for a total of 12,956 MW. More than a quarter of that new capacity (25.29% - 3,276 MW) came on-line in the month of December 2012 alone.


Wind led the way in 2012 with 164 new "units" totaling 10,689 MW followed by solar with 240units totaling 1,476 MW. Biomass added 100 new units totaling 543 MW while geothermal steam and water each had 13 new units with installed capacities of 149 MW and 99 MW respectively.

By comparison, for the full 12 months of 2012, new natural gas generation in service totaled 8,746 MW (33.15%) followed by coal (4,510 MW -17.09%), nuclear (125 MW - 0.47%), and oil (49 MW - 0.19%).

New capacity from renewable energy sources in 2012 increased by 51.16% compared to 2011when those sources added 8,571 MW. In 2011, renewables accounted for 39.33% of all new in-service generation capacity.

Renewable sources now account for 15.40% of total installed U.S. operating generating capacity: water - 8.47%, wind - 4.97%, biomass - 1.30%, solar - 0.34%, and geothermal - 0.32%. This is more than nuclear (9.24%) and oil (3.57%) combined. *

"If there were still any lingering doubts about the ability of renewable energy technologies to come on-line quickly and in amounts sufficient to displace fossil fuels and nuclear power, the 2012 numbers have put those doubts to rest," said Ken Bossong, Executive Director of the SUN DAY Campaign. "Not only has renewable energy become a major player in the U.S. electrical generation market, but it has also emerged in 2012 as THE reigning champion."

Featured Product

WS510 Secondary Standard

WS510 Secondary Standard

In the monitoring of large photovoltaic (Utility Scale), in assessing potential sites (Solar-assessment), or in up and coming electricity cost saving initiatives projects (Commercial & Industrial), the WS510 now provides the market a secondary standard pyranometer, ultrasonic wind speed, ultrasonic wind direction, temperature, pressure and humidity all in a single unit.. This sensor meets the high demands of the world meteorological organization (WMO) through the active valving at air temperature measurement and the inertia- and maintenance-free measurement of wind speed and wind direction on the ultrasonic principle. Equipped with a Kipp & Zonen pyranometer of the secondary standards, the WS510-UMB Compact weather sensor from Lufft unites the precision of a variety of meteorological individual sensors in a single all-in-one device, for the first time.