Meteodyn will attend the US Wind Power conference and exhibition!

2013 WINDPOWER in Chicago – May 5-8 – Booth No 3045 Once again this year, Meteodyn will exhibit and give software demonstrations during the most important wind energy event in North America. You are warmly welcome to discuss, share experience and ask questions to our experts.

Meteodyn will also present 2 posters validated by the AWEA authority:

- Evaluation of CFD wind flow computations at Andhra Lake wind farm (India)
- Optimal combination of CFD Modeling and Statistical Learning for Short-Term Wind Power Forecasting

Meteodyn develops numerical wind modeling software and studies wind park projects' feasibility.
Wind resource assessment in every kind of terrains, extreme wind analysis, wind turbine location study to optimize energy production: you need to know all these parameters to develop a profitable wind energy project. The techniques used by Meteodyn, based on the Fluids Mechanics equations, are the most performing and reliable ones to give you this precious information.
Meteodyn does not only work on the preliminary study. Meteodyn develops also wind production forecasting solutions to optimize wind farm production taking care of wind machine lifespan.

For more information about our consulting topics, numerical software, visit our website at:
www.meteodyn.com/en

Featured Product

TRA SNOW AND SUN - SOLAR TILE MOUNT

TRA SNOW AND SUN - SOLAR TILE MOUNT

You haven't installed a tile mount that is easier to install than the Solar Tile Mount manufactured by TRA Snow and Sun. Solar Tile Mount is used on all tile roof profiles: flat, mid, and high. It is made in the USA of aluminum alloy for strength and excellent corrosion resistance. Solar Tile Mount is built to allow more ease in installation with more rise from the tile surface to the rail for better air flow below panels. The adjustable base is longer than most allowing attachment 6" to the left or right to have the bracket in the base of the pan of the tile and still fasten to the rafter. Solar Tile Mount is adjustable for counter batten systems from ¾" to 3". The horizontal rail is directly above base fasteners giving greater uplift resistance than any other system. For superior waterproofing apply TRA Snow and Sun's butyl backed VersaFlash aluminum flashing. No tile flashing is needed on top of the tile for greater labor and material cost savings.