Swedish fuel cell developer PowerCell finalizes the development of its second fuel cell stack platform

The new fuel cell will have good stability and a compact and robust design for both automotive and stationary applications.

[Gothenburg, Sweden, February 3, 2014.] Nordic fuel cell technology leader PowerCell is in the final stage of development of its next generation' fuel cell stack platform, the S2. The S2 covers a larger power range up to 25 kW and maintains the same tolerance towards CO and reformate gas as the present platform, the S1. The new fuel cell will have good stability and a compact and robust design for both automotive and stationary applications.


PowerCell, the Nordic fuel cell technology leader, is currently in the final stage of development of its second fuel cell stack platform, the S2. PowerCell's fuel cell stack is designed to work in an auxiliary power unit (APU) environment on reformate gas as well as on a variety of systems running on pure hydrogen, for both automotive and stationary applications. It uses thin metal bipolar plates and state of the art membrane electrode assembly (MEA) to give a robust and high performance design prepared for serial production from the start.

The S2 platform will complement the first generation fuel cell stack, the S1 (1-5 kW), as it covers a larger power range up to 25 kW, still with the same tolerance towards CO and reformate gas. The S2 uses proton exchange membrane (PEM) technology and is the choice for automotive applications. PEM is the most common technology used today, owing to its reliable and dynamic characteristics that allows for full power output within seconds.

Another feature is the capability for extensive starts and stops. This feature means that battery buffers can be kept to a minimum. PowerCell S2 fuel cells stack platform is; efficient, unique, patented and designed for low pressure drop. Of key importance is the facts that the S2 fuel cells possesses a high CO tolerance, which is a key factor to be able to run on reformate gas. This feature has been proven in extensive testing in laboratories as well as in connection with PowerCell reformers in complete APU systems.

"After three years of development, we are pleased to finalize our second fuel cell stack platform, the S2. This platform will complement the first generation fuel cell stack, S1 (1‑5 kW), as it covers a larger power range of up to 25 kW. This gives us the possibility to approach other applications and broadening our market potential," said Magnus Henell, CEO at PowerCell. "The interest from the transport, telecom and other sectors is huge, given these industries' need to reduce operating expenses while at the same time find power solutions that are clean, sustainable and compliant with ever-stricter environmental legislation. We are now in the phase of selecting which pilot clients to cooperate with for prototype testing."

Featured Product

GreenFasten™ solar panel roof mount hardware, watertight, USA made

GreenFasten™ solar panel roof mount hardware, watertight, USA made

The GreenFasten™ - GF1 system utilizes the patented watertight technology EcoFasten Solar® is known for. The flashing is fit with our EPDM rubber bushing and when used with a compatible EcoFasten Solar compression bracket (milled with countersink), a watertight seal is created, which protects the integrity of the roof. Requiring just a single fastener (lag bolt or self-drilling), GreenFasten provides the fastest install in the industry and will not void roofing manufacturer's warranties. Backed by IAPMO certification, GreenFasten delivers a mounting solution for all new or existing (retrofit) composition shingle roofs, and is the most cost-effective solution available. Like all of the solar roof mount solutions in our line of products, GreenFasten is made in the USA using recycled materials.