The new stack designs are available for applications at three voltage levels 3.3kV, 6.6kV and 10kV and incorporate IXYS UK's market leading press-pack IGBT technology.

LEIDEN, Netherlands--IXYS Corporation (NASDAQ:IXYS) an international power and IC semiconductor company, today announced that its wholly owned UK subsidiary, IXYS UK Westcode Ltd., introduced a range of standard three-level press-pack IGBT phase leg stacks with power rating up to 16 Megawatts.

The new stack designs are available for applications at three voltage levels 3.3kV, 6.6kV and 10kV and incorporate IXYS UK's market leading press-pack IGBT technology. The 3.3kV option is available as a single stack, comprising a complete phase leg of four 2400A press-pack IGBTs plus the anti-parallel and neutral point clamp diodes. The phase leg is rated at 8MW.

Both the 6.6kV and 10kV solutions comprise discrete stacks of 1600A reverse conducting press-pack IGBTs and fast diodes which can be configured into the phase leg. Each phase leg would require 2 IGBT stacks and 1 diodes stack. The 6.6kV stacks are rated at up to 12MW and the 10kV units are rated up to 16MW. The 6.6kV stack comprise four series devices and the 10kV stacks six. Actual power ratings will depend on how the customers configure their control systems.

Each system benefits from direct water cooling to provide highly effective heat dissipation away from the devices and pre-loaded disc spring clamping to evenly distribute the applied force across the entire surface area of the device. Stacks use an isolated clamping rod system to limit the occurrence of eddy currents within the unit. The IGBT stacks also incorporate gate trigger boards and snubber circuits.

"These new introductions are targeted for project development and will allow our customers quicker access to prototype development. IXYS UK can then either continue to supply a customised stack to their specifications or the components to fit their own design," commented Frank Wakeman, IXYS UK's Marketing and Technical Support Manager.

Stack part numbers are: a 3.3 kV unit XA1600GV45WT, 6.6kV units XA1000GV45WT/B (IGBT) and XA1000TV45WE/B (diode) and 10kV units XA1000GV45WT/A (IGBT) and XA1000TV45WE/A (diode).

Typical applications includes medium voltage drives for industrial, marine and renewable energy infrastructures including wind generation, plus very large drives for use in the oil, gas and steel industries. For applications such as electrical grid control switches and HVDC applications, please contact IXYS UK to discuss other circuit topology stack solutions.

For further information please contact IXYS UK at (email: sales@ixysuk.com) or telephone: +44 (0)1249 444524 for quotation.

About IXYS UK

Located in Chippenham, England, IXYS UK Westcode Ltd is the IXYS leading manufacturing site for very high power thyristors, SCRs and rectifiers ranging up to 6500 Volts and 15,000 Amps. IXYS UK continues to supply high technology components for a wide range of applications such as wind and solar energy, welding, AC and DC motor drives for oil, marine and water treatment facilities, uninterruptible power supplies, motor soft starters, transportation, induction heating, mining equipment and many other industrial applications.

About IXYS Corporation

Since its founding, IXYS Corporation has been developing power semiconductors and mixed signal ICs to improve power conversion efficiency, generate solar and wind power and provide efficient motor control for industrial applications. IXYS, and its subsidiary companies, offer a diversified product base that addresses worldwide needs for power control in the growing cleantech industries, renewable energy markets, telecommunications, medical devices, transportation applications, flexible displays and RF power.