Wind Turbines Outperforming Expectations at Honda Transmission Plant

Two turbines have exceeded power projections in first six months of operation

PIPESTONE, Minn., Sept. 10, 2014 -- Juhl Energy, (OTCQB: JUHL) -- Just six months after the landmark installation of two power-producing wind turbines at Honda Transmission Mfg. of America, Inc., the turbines are producing more renewable, low emissions electrical power than was anticipated when the towers went into operation in January.


The wind turbines have exceeded the projected power output figures by 6.3 percent, and have contributed toward reducing the CO2 emissions of power production, helping Honda (NYSE: HMC) reach its voluntary goals to reduce the environmental impact of its products and manufacturing operations by 2020. This includes a 30 percent reduction in CO2 emissions from Honda products, and significant CO2 reductions from the company's plants and other operations, compared with year 2000 levels.

The two turbines, standing 260 feet tall with 160-foot blades, were initially projected to produce upwards of 10,000 megawatt hours (MWH) of electricity per year, accounting for approximately 10 percent of the plant's annual power needs. The turbines have outperformed company projections in four of the six months since operation began. At their highest output, the turbines provided 16.26 percent of the plant's power requirements for the month of April.

"We are extremely pleased with the performance of the wind turbines' production over their first six months," said Gary Hand, Vice President of Honda Transmission Mfg. of America. "The turbines' operation has exceeded the projections established during the project development."

The installation of the turbines makes the Russells Point, Ohio plant the first major automotive facility in the United States to receive a substantial amount of its power from on-site wind turbines. The project was developed and installed by Juhl Energy from Pipestone, Minnesota. The two turbines are owned by ConEdison Solutions.

"We are pleased to observe the performance of the two on-site wind turbines are achieving results over and above what Honda had anticipated. From the outset, we were confident that the site location selected would allow the GE turbines to produce a significant amount of the facility's' energy requirements," stated Tyler Juhl, Vice President of Operations for Juhl Energy."

"ConEdison Solutions takes tremendous pride in our commitment to customers, and we are proud to be helping Honda implement its innovative energy program at Russells Point," said Michael W. Gibson, Vice President of Energy Services at ConEdison Solutions. "With this initiative, Honda has set an excellent example for the American manufacturing sector, and we are gratified that they have been pleased with its success."

To achieve their new environmental targets, Honda is accelerating its efforts to advance the environmental performance of its products, and its operations throughout North America. The wind turbine project is among a number of other initiatives at Honda plants to reduce energy use and waste from manufacturing operations.

Honda Environmental Leadership

Based on its vision of "Blue Skies for our Children," Honda is working to advance technologies that address society's environmental and energy concerns through a diverse lineup of products and technologies, including more fuel-efficient gasoline engines, natural gas, hybrids, plug-in hybrids, battery electric vehicles (BEVs) and fuel cell electric vehicles (FCEVs).

Today, Honda is targeting a 30-percent reduction in CO2 emissions from its U.S. automobile product lineup by 2020, compared to 2000 levels. In pursuit of its vision for a zero-carbon future, the company is advancing electromotive technologies in many forms, and will introduce an advanced new fuel cell car in 2015.

In keeping with its commitment to produce vehicles with the lowest CO2 emissions at plants with the smallest environmental footprint, the company is broadly addressing emissions, energy, water use and waste in all phases of its products life cycles. In the manufacturing realm, this includes a 95 percent reduction in waste sent to landfills in North America. Honda is working to extend its "green factory" and "green purchasing" initiatives to its more than 650 parts suppliers in North America and is also pursuing more environmentally responsible business practices among its U.S. dealers.

Honda is also demonstrating its vision for zero-carbon mobility and living with the creation of the Honda Smart Home US, in Davis, California, which was opened in early 2014 and is designed to operate with half the energy use and CO2 emissions of a typical home in that region.

About Honda

Honda (NYSE: HMC) established operations in America in 1959 and now employs more than 39,000 associates in its North American sales, R&D and manufacturing operations with total capital investment in North America exceeding $22 billion.

Based on its longstanding commitment to "build products close to the customer," Honda operates 16 major manufacturing facilities in North America producing a wide range of Honda and Acura automobiles, automobile engines and transmissions, Honda all-terrain vehicles, power equipment products, such as lawn mowers, mini-tillers and general purpose engines, and the HondaJet advanced light jet.

Eight Honda auto plants in the region, including four in the U.S., have the capacity to produce 1.92 million automobiles each year. In 2013, more than 94 percent of the Honda and Acura automobiles sold in the U.S. were produced in North America. Those plants today manufacture 11 different models, including four passenger cars and seven light trucks using domestic and globally sourced parts. A fifth U.S. auto plant, the Performance Manufacturing Center, is under construction in Marysville, Ohio, and next year will become the exclusive global production location for the next generation Acura NSX supercar.

Honda also operates 16 major research and development centers in the U.S. with the capacity to fully design, develop and engineer many of the products Honda produces in North America.

Featured Product

DPW Solar Power Rail™

DPW Solar Power Rail™

The Power Rail™ hardware system is the professional grade choice for mounting PV Modules on residential roofs and commercial structures. Featuring revolutionary RAD™ lock-in-place hardware, grounding and pre-assembled clamps, the Power Rail mounting system offers installers both labor and time savings. What sets this mounting system apart are eight rail choices for reducing costs over a broad range of span distances. Since 1993, DPW Solar mounting systems have provided installers the right combination of innovative products, cost savings and proven solar mounting technologies.