Schletter Group: 2 MW ground-mounted plant in gravel pit near Chicago

The two-support structure Schletter FS Duo was installed with extra-strong pile-driven foundations. Project development was carried out by SunPeak, based in Madison, Wisconsin.

Kirchdorf/Haag (Germany), March 3, 2020. Schletter Group has supplied the mounting systems for one of the largest customer-sited projects in the American Midwest. On the grounds of a retired gravel pit near Chicago, 7,260 solar modules generate roughly 2 MWp of solar power for the local business "Thelen Sand & Gravel". The two-support structure Schletter FS Duo was installed with extra-strong pile-driven foundations. Project development was carried out by SunPeak, based in Madison, Wisconsin.


"The plant for Thelen Sand and Gravel was not one of these large off-the-shelf projects," said Fabian Huber, Head of Technical Advisory for Ground-Mounted Systems at Schletter, who planned and supervised the project. "The soil in the gravel pit is extremely compressed and stony, and at the same time, plants in this region have to withstand high snow and wind loads in winter. We therefore had to come up with a special solution."

Because of the difficult ground conditions, which had been foreseeable, Schletter carried out a series of test pile-driving during the planning phase. "Our tests showed that the pile-driving profiles we normally use with a material thickness of 3mm were not strong enough to be reliably inserted into the ground, as the ground is riddled with stones and highly compact," Mr. Huber, who supervised the pile-driving on site, explained. In order to solve this problem and to ensure the structures are safely anchored in the ground, extra-strong pile foundations with a material thickness of 4mm were used. They also have a special profile geometry that prevents deformation when rammed into hard ground.

Although systems with only one support are often used for ground-mounted installations in the US, this customer decided in favor of the FS Duo two-support structure, as this system is capable of supporting heavy snow and wind loads. "For this situation, a two-support structure was the more economical solution," Mr. Huber elaborated. "The benefit of additional stability clearly outweighs the slightly higher costs of material. In particular in the light of the fact that the system is designed to last 20 to 30 years under tough conditions". In winter, the area south of Lake Michigan is regularly hit by heavy snowfall and storms.

Thelen Sand & Gravel is using all of the solar power generated by the plant, thus covering around 30 percent of its energy consumption. The company installed the system to save energy costs, but more importantly to improve its carbon dioxide footprint.

Schletter Group has worked with SunPeak, the project developer, for several years. The two companies have collaborated on several other projects, with total installed capacity of more than 20 MWp.


About the Schletter Group

The Schletter Group is one of the leading manufacturers in the world of photovoltaic mounting systems made of aluminium and steel. The Group manufactures mounting systems for roofs, façades and open areas (solar farms) as well as solar carports. With an international network of production, distribution and service companies, the Schletter Group is active in all important international markets. The Schletter Group has around 650 employees in total.

www.schletter-group.com

Featured Product

SOLTEC – SFOne single axis tracker

SOLTEC - SFOne single axis tracker

SFOne is the 1P single-axis tracker by Soltec. This tracker combines the mechanical simplicity with the extraordinary expertise of Soltec for more than 18 years. Specially designed for larger 72 an 78 cell modules, this tracker is self-powered thanks to its dedicated module, which results into a lower cost-operational power supply. The SFOne has a 5% less piles than standard competitor, what reduces a 75% the labor time.