The GreenFasten™ - GF1 system utilizes the patented watertight technology EcoFasten Solar® is known for. The flashing is fit with our EPDM rubber bushing and when used with a compatible EcoFasten Solar compression bracket (milled with countersink), a watertight seal is created, which protects the integrity of the roof. Requiring just a single fastener (lag bolt or self-drilling), GreenFasten provides the fastest install in the industry and will not void roofing manufacturer's warranties. Backed by IAPMO certification, GreenFasten delivers a mounting solution for all new or existing (retrofit) composition shingle roofs, and is the most cost-effective solution available. Like all of the solar roof mount solutions in our line of products, GreenFasten is made in the USA using recycled materials.
Solar Power International 2012 Booth Number: 2376
Our batteries have Xtreme thick plates with (XC Diamond Plate Technology) added to them. They have been designed for hours of heavy discharge each day, followed by a fast recharge during the daylight hours. Very few batteries can take the grueling deep discharge-recharge cycle every day for long periods of time. U.S. Battery has proven time and time again that our solar battery line can stand up to this type of battery torture day in and day out for years to come. When you demand reliable energy storage count on U.S. Battery every time!
Solar Power International 2012 Booth Number: 456
Equipped with an extremely low power, smart interface the Smart SMP pyranometers offer industry standard digital and amplified analog outputs within the well-known CMP series housings. The output range is programmed so that all SMP pyranometers have identical sensitivities, allowing easy installation and exchange for recalibration. Serial communication allows access to measurement data, instrument status, operating parameters and calibration history. Building on the proven CMP Series design and technology that is used around the world, the new SMP pyranometers add digital signal processing and interfaces optimised for industrial data acquisition and control systems.
Solar Power International 2012 Booth Number: 745
Off-grid or on-grid, system designers and installers now have a comprehensive power conversion and storage solution from the name they trust: OutBack. Engineered from the ground up, OutBack's preassembled systems make balance-of-system components easier to specify and install in any residential or commercial installation. The Radian packs over 8,000 Watts of pure sine-wave continuous power and can be stacked into an 80 kW configuration for larger applications. The Integrated Battery Rack (IBR) is a 28.8 kWh one-box solution with all electrical connections made at the factory and shipped fully-assembled (without batteries) for quick connection on the jobsite.
Solar Power International 2012 Booth Number: 4133
With a full range of capacity options (85AH-3300AH) and voltage configurations to choose from, Rolls Battery maintenance-free 2V, 6V & 12V AGM and broad range of 2V GEL models offer a valve regulated lead acid (VRLA) battery option with the same dependable energy storage and heavy-duty construction customers have grown to expect from the Rolls brand for over sixty years. Installed in off-grid, grid-tied or backup float applications, these sealed batteries require minimal ongoing maintenance and provide a versatile energy storage solution for remote or confined installations. Rolls Battery AGM and GEL battery lines deliver superior cycle life and are backed by an industry-leading warranty.
Solar Power International 2012 Booth Number: 3448