Schneider Electric succeeds using Lufft weather to monitor 488 Kw commercial solar Array in Virginia

Schneider Electric with Lufft and Evergreen Solar install a 488 Kilowatt solar array at the Virginia NAtional Guard 183rd Regiment training facility. This system will help to meet the energy needs of the facility. Energy use by traditional sources is reduced by over 712,000 kilowatt hours per year.

The demand for reliable sources of renewable energy is growing in the United States. The U.S. Solar industry achieved another record year in 2014, growing by 34% over 2013 to install nearly 7,000 megawatts (MW) of solar electric capacity. Within the photovoltaic (PV) sector, over 6,200 MW of capacity was installed, led by the residential and utility segments*. Reduced barriers to entry and an advantageous political climate are helping to grow Solar power around the country. Companies as well as state run organizations are recognizing the benefits to installed solar capacity on their rooftops. Rooftop solar provides substantial benefits not only for the installer but for every surrounding utility customer. It helps power the homes and shops that adopt it, to be sure, but it has far-reaching benefits for other customers as well.

The Virginia National Guard 183rd Regiment decided to complete a solar installation at their Regional Training Institute (RTI) at Fort Pickett, VA. The project, a $2.2 million, 488 kilowatt solar array that measures 10,000 square yards and consists of nearly 2,000 individual solar panels, provides the RTI with nearly 80 percent of its daytime energy needs. This field is estimated to produce 712,000 kilowatt hours per year and was installed adjacent to the RTI campus. This equals a reduction in 1,144,088 lbs of CO2 from the atmosphere if this energy were to be produced by conventional power production*. The Lufft weather sensor provides wind speed, wind direction, temperature, humidity and air pressure. The weather station and pyranometer together provide weather and solar radiation data from the field that is then integrated into a Schneider Electric BAS and display on the customer's energy management dashboard. Evergreen Solar was the installer on the job with oversight from Schneider Electric. Lufft provided the weather sensor that provides data for the array.
*SEIA Industry data 2014

Featured Product



You haven't installed a tile mount that is easier to install than the Solar Tile Mount manufactured by TRA Snow and Sun. Solar Tile Mount is used on all tile roof profiles: flat, mid, and high. It is made in the USA of aluminum alloy for strength and excellent corrosion resistance. Solar Tile Mount is built to allow more ease in installation with more rise from the tile surface to the rail for better air flow below panels. The adjustable base is longer than most allowing attachment 6" to the left or right to have the bracket in the base of the pan of the tile and still fasten to the rafter. Solar Tile Mount is adjustable for counter batten systems from ¾" to 3". The horizontal rail is directly above base fasteners giving greater uplift resistance than any other system. For superior waterproofing apply TRA Snow and Sun's butyl backed VersaFlash aluminum flashing. No tile flashing is needed on top of the tile for greater labor and material cost savings.