Only Wind Blade Test Facility in East for Small- to Medium-scale Blades Opens

Will test the strength and rigidity of small- and medium-scale wind turbine blades

Potsdam, N.Y. -- The Center for Evaluation of Clean Energy Technology (CECET) and the New York State Energy Research and Development Authority (NYSERDA) joined Clarkson University yesterday in announcing the grand opening of a new Blade Test Facility that will test the strength and rigidity of small- and medium-scale wind turbine blades.

The CECET Blade Test Facility serves manufacturers of small- and medium-size turbines, which range from backyard-sized residential turbines to turbines capable of providing significant power for a municipal facility, large farm or manufacturing complex.

Large and frequent fluctuations in wind intensity and directions can cause structural problems for wind turbine blades. Blade testing is necessary to certify wind turbines to international standards for strength and safety, and can be used by manufacturers to market the benefits of their products, as well as improve product standards and quality.

There is no other testing site for this scale of blade in the Eastern United States, and few others across the nation.

"Governor Cuomo has made it a priority for the state to increase its renewable energy generation, and wind is a valuable component in New York's renewable energy portfolio. By investing in this vital laboratory, NYSERDA is helping to bolster the wind industry in general, and in particular wind power investment in New York State," said Francis J. Murray Jr., President and CEO, NYSERDA. "This facility marks another important step in expanding the state's clean energy economy and will bring economic activity to the North Country."

"We are pleased that Governor Cuomo and NYSERDA have shown their confidence in Clarkson as a partner in research and evaluation to support and grow New York-based wind market activities," said Tony Collins, President, Clarkson University. "Our goal is to serve as the go-to research facility for manufacturers of small- to mid-size wind turbines. This work provides another avenue to build the knowledge base in sustainable technologies for our communities. Renewable energy is vital to our State's economic prosperity, our national security and the stewardship of our natural environment."

"This Blade Test Facility will allow turbine blade manufacturers to advertise the strength and rigidity of their products," said Rick Lewandowski, CECET's Executive Director. "CECET's parent company, Intertek of Cortland, has tremendous interaction with renewable technology companies all around the world and sees firsthand the importance of this type of service. We are very proud to be in business with Clarkson, a leader in this field, and thankful to NYSERDA for its support."

NYSERDA has contributed $877,000 to CECET toward the creation of this $1.2 million facility. In all, NYSERDA has contributed about $4 million to CECET, which will also operate a solar panel testing facility in Cortland, now under construction and expected to be operational by this fall.

CECET is owned by Intertek, a global corporation that specializes in testing, inspecting, certifying and other technical solutions.

NYSERDA has also partnered with Clarkson on several other clean energy projects:

Demonstrating the viability of data centers powered by renewable energy, in a joint project with Advanced Micro Devices, HP, GE, Rocky Mountain Institute (RMI) and other entities. The project makes use of distributed green data centers located near renewable resources such as wind farms.

A smart housing study, which involves a university-based psychology group working with students to find ways to encourage dorm room residents to take steps to reduce power consumption such as turning down heat or lights when not present.

A wood boiler at Clarkson's Walker Center, which was also used to demonstrate the benefits of imported high-efficiency wood pellet boilers. Clarkson has also evaluated the first made-in-New-York high-efficiency boiler, now at the Tupper Lake Wild Center, and other wood boilers in upstate New York. Clarkson is currently adding thermal storage to its existing boiler to achieve higher energy efficiency.

NYSERDA currently provides up to 50 percent funding for small and medium "behind-the-meter" wind turbines for residences, farms, businesses, municipalities and other power users. There are currently more than 150 turbines in New York State funded through this program. NYSERDA has provided nearly $6 million for these projects, leveraging an additional $10 million in private investment in non-grid wind power.

Featured Product



Our RE Series batteries are designed to provide the highest peak capacity, longest cycle life, and greatest reliability for use in industrial or residential renewable energy applications. Renewable Energy Series batteries utilize the company's exclusive XC2™ formulation and Diamond Plate Technology® to create the industry's most efficient battery plates, delivering greater watt-hours per liter and watt-hours per kilogram than any other flooded lead-acid battery in the market. Our Deep Cycle batteries are engineered to work with solar panels as well as other renewable energy applications.