Mid-Certification Standards Unpacked: A Deep Dive into EN50470-1/3 vs. EN50470-3:2022 and Their Impact on Smart Metering
The Measuring Instruments Directive (MID), established under EU Directive 2014/32/EC, serves as a cornerstone for harmonizing measurement standards across Europe, ensuring fair trade and consumer protection. First enforced in 2006, MID provides a unified framework for certifying instruments like electricity meters, enabling manufacturers to access the entire EU market with a single certification. To align with technological advancements and evolving grid demands, the MID standards undergo periodic updates. The latest revision, EN 50470-3:2022, replaces earlier versions EN 50470-1/3, introducing enhanced requirements for modern energy measurement systems.
Case Study - 11MW KST-1P-TL Solar Tracker Project in Italy
Recently, one solar project utilized Kseng Solar's KST-1P-TL Solar Tracker in Italy with a total capacity of 11MW spanning six sites, is now under installation.
Solar Inverter Market Size to Cross USD 25.81 Billion by 2034
The global solar inverter market size was calculated at USD 11.99 billion in 2024 and is projected to cross around USD 25.81 billion by 2034 with a CAGR of 7.97%.
Scanifly and Pegasus Integrate Drone-based PV Design with Racking Layouts, Removing Rework and Accelerating Time-to-Install
The integration automatically transfers Scanifly design data and panel placement directly into the Pegasus Design Tool, eliminating platform switching and duplicate work.
Nature's Generator Debuts Groundbreaking MyGrid 10K: a World First Plug-and-Play Solar/Wind Whole Home System that Functions as Your Own Grid
MyGrid 10K Delivers Unprecedented Power and Sets up just in Minutes, Adds Backup if Solar Already Installed, Ideal for Both Homeowners and Tenants - All at a Fraction of the Cost of Tesla Powerwalls
Intersolar & ees Middle East 2025 to Take Center Stage at Dubai World Trade Center from April 7-9, 2025.
Over the three-day event, attendees will have the opportunity to connect with industry leaders, discover the latest innovations in photovoltaics, utility-scale solar, energy storage, and green hydrogen, and gain insights into the future of sustainable energy in the MENA region.
PG&E Advancing $43 Million for Nine New Community Microgrids in Northern California
Application Window for Second Wave of PG&E Microgrid Incentive Program Grants Opens April 3
Solar Insure Unveils SI-30 Battery Warranty and Expands Approved Vendor List
This warranty supports the growing need for energy storage in the solar industry and addresses the increasing demand for dependable, future-proof solutions.
How New Leaf Energy Uses Anza's Module Data to Improve Its Solar Development Design Process
New Leaf Energy faced hurdles in module selection and project optimization due to the lack of up-to-date pricing and production data. The team struggled to access reliable cost and availability information.
SolarPower Europe extends its reach to storage and flexibility in response to EU security and competitiveness challenges
The Association launches two new reports on flexibility, 'Flexible Buildings, Resilient Grids' and 'Embracing the benefits of Hybrid PV systems', which focus on distributed and utility flexibility respectively.
New Large-Scale Battery Inverter Sunny Central Storage UP-S
Designed for large-scale energy storage projects, it features advanced silicon carbide SiC MOSFET (silicon carbide metal-oxide-semiconductor field-effect transistor) technology for superior power conversion efficiency and grid-forming capabilities. Following a successful launch in Australia, this cutting-edge solution is set to support grid stability and energy transition efforts in the American market.
Shoals Technologies Group and First Solar Continue Partnership
Partnership Reinforces Commitment to U.S. Solar Manufacturing and American Jobs
PV Hardware Unveils DeepTrack: Cutting-Edge Ecosystem Optimizes Solar Tracking Performance, Efficiency and Reliability
Intelligent Platform Revolutionizes Real-Time Monitoring, Predictive Maintenance and Performance of Solar Trackers, Increases Energy Output by up to 25%
CMI Plastics' Solar Installation Generates 50% of Its Energy Needs While Supporting Customer Efforts to Reduce Scope 3 Emissions
Ayden NC-based family-owned business partners with Pisgah Energy to install a solar electric system that will generate 50% of its energy needs while supporting customer efforts to reduce their scope 3 emissions. The new solar array will generate over 899,000kWh of clean renewable energy, offsetting the equivalent of 563 metric tons of carbon dioxide.
Aurora Solar Snapshot Reveals Growing Confidence, Gen Z Momentum, & Climate-Driven Solar Demand
Despite a turbulent year marked by policy shifts & high interest rates, 76% of U.S. homeowners see solar as a good investment - up from just 43% in 2023 - according to Aurora Solar's third annual Solar Snapshot
Records 211 to 225 of 30623
First | Previous | Next | Last
Solar Power - Featured Product
OMCO Origin® Factory-Direct Trackers
A One-In-Portrait (1P) solution for a wide range of solar projects within utility scale, distributed generation (DG), and community solar markets manufactured and factory preassembled in the USA at OMCO Solar with full-scale support, and design for quick, easy and safe installation, and fewer trackers per MW. OMCO makes all structural components with domestic steel and this balanced design allows for more accurate targeting and reduced energy consumption. OMCO Origin® Factory-Direct Trackers include universal module mounts with options for all commercially available modules, labor-saving bearings with 6 adjustable ways to compensate for posts and terrain issues, and foundation solutions for every terrain including OMCO C Piles.
