Biogas-Powered Fuel Cell System Featured in Stockholm Environmental Center

Acumentrics, a fuel cell system maker, installs a 5 kW biogas-powered system in the GlashusEtt, an environmental learning center in Stockholm. The renewable biogas is made from city sewerage.

WESTWOOD, Mass., May 25, 2007 - Acumentrics Corporation (www.acumentrics.com), a leading developer of solid oxide fuel cells and winner of a 2007 New England Innovation Award, announced today that they shipped a 5 kW fuel cell generator to the innovative GlashusEtt environmental information center in Stockholm, Sweden. The generator was purchased by ABB Corporate Research in Västerås, Sweden, together with 8 other Swedish companies and organizations (FMV, Fortum, GlashusEtt, JM, Morphic, SBC, the City of Stockholm and the Swedish Energy Agency). The purpose of the installation is to evaluate state-of-the-art solid oxide fuel cell (SOFC) technology.


"We are thrilled to see our units run on carbon-neutral biogas," said Gary Simon, CEO of Acumentrics. "People from all over the world come to observe Hammarby Sjöstad's clever environmental system. And our ability to run directly off biogas makes our fuel cells extremely practical. While we can run on hydrogen, too, it is great to offer compatibility with logistical, affordable fuels. The renewable aspect is a huge bonus."

Stockholm has developed a new, eco-friendly, waterfront district called Hammarby Sjöstad which is slated to house some 25,000 residents. The district features solar cells, green roofs, foot paths, environmentally benign building materials, vacuum-assisted refuse collection, and a wastewater treatment plant that produces biogas for the district.

The wastewater treatment plant produces high quality, 97% methane biogas that is piped into apartments for heating and cooking. This same biogas is piped to the Acumentrics fuel cell system. Acumentrics' solid oxide fuel cells disassociate fuels inside the cell, via in-situ reformation. They run directly from the biogas, without the need for complex pre-processing (reforming) of the fuel. The result is an elegant power system with fewer parts

At present the electricity produced by the fuel cell is put to a load bank, but grid-tie ability is slated for later this year. Acumentrics' fuel cells have the unique ability to follow loads. Output can be adjusted up or down with no harm to the cells. The company believes this is the first real-world solid oxide fuel cell installation that runs on biogas.

The GlashusEtt (www.hammarbysjostad.se/glashusett) is Hammarby Sjöstad's environmental information center. Knowledge is disseminated via study trips, exhibitions, and demonstrations of new environmental technology. Acumentrics' fuel cell system is located on the third floor.

For more information contact Norm Bessette, CTO Acumentrics, at +1 (781) 461-8251 x407

Featured Product

HPS EnduraCoilTM Cast Resin Medium Voltage Transformer

HPS EnduraCoilTM Cast Resin Medium Voltage Transformer

HPS EnduraCoil is a high-performance cast resin transformer designed for many demanding and diverse applications while minimizing both installation and maintenance costs. Coils are formed with mineral-filled epoxy, reinforced with fiberglass and cast to provide complete void-free resin impregnation throughout the entire insulation system. HPS EnduraCoil complies with the new NRCan 2019 and DOE 2016 efficiency regulations and is approved by both UL and CSA standards. It is also seismic qualified per IBC 2012/ASCE 7-10/CBC 2013. Cast resin transformers are self-extinguishing in the unlikely event of fire, environmentally friendly and offer greater resistance to short circuits. HPS also offers wide range of accessories for transformer protection and monitoring requirements.