Anderson Power Products Offers 3 & 5 Position Mini PL SPEC Pak Connector
Mini PL SPEC Pak connectors are touch safe on both sides and feature a latching shell.
Anderson Power Products (APP) Mini PL SPEC Pak is a series of compact, environmentally sealed connectors. Mini PL SPEC Pak connectors are touch safe on both sides and feature a latching shell. Power handling capabilities up to 23 amps and 600 volts AC/DC per pole allow more power in a smaller waterproof (IP68) shell than competing solutions.
More Headlines
- Con Edison and National Grid Select CPower for Dynamic Load Management Program in New York
- Tech company joins forces with Ontario solar distributor
- McKinstry and Fremont RE-2 School District Kick Off Energy Awareness and Operational Efficiency Program
- ACORE Statement on the Clean Energy for America Act
- Power Edison Supplying World's Largest Mobile Battery Energy Storage System
Available in both three and five pole configurations, Mini PL SPEC Pak can be used in wire to wire and wire to panel applications accommodate up to 12 awg (2.5 mm²) wires while maintaining the compact size. Gold plated contacts down to 24 awg (0.25 mm²) are suitable for power or signal needs. Optional sequencing capabilities are available for design flexibility.
For more information about Mini SPEC Pak, SPEC Pak, and other innovative high power interconnect solution from Anderson Power Products visit http://www.andersonpower.com.
Featured Product
RBI Solar - Dahlia Has You Covered
What if you could maximize the Ground Coverage Ratio (GCR) on your next project and not have to worry about the complicated variables that come with a tracker system? With a low tilt and clearance design, Dahlia® has the highest GCR of any fixed-tilt system in the marketplace. The system is available in three tilt options (7.5, 10 and 12.5 degrees) and designed to accommodate any sized PV module. The lightweight system is engineered with fewer components, several of which are shipped to job sites pre-assembled. This design feature reduces freight costs and rapidly trims the amount of on-site installation time required to complete construction. Maximizing PV coverage on a site can lead to an increase of production, which creates greater financial return for project owners. Over 100 MW of Dahlia® projects have been deployed across the United States, in regions of variable snow and wind loads. How much can Dahlia® cover and save you on your next project?
