Hithium Sets to Participate in RE+ 2022: Solar Power International and Energy Storage International

During the RE+ 2022, Hithium will showcase its full range of energy storage battery products, including two game-changing batteries: the 300Ah prismatic cell tailored for electric energy storage and the 46mm cylindrical cell for residential energy storage with breakthroughs in safety, energy efficiency, cycle life and cost.

From the First Job, RT-MINI Inspires Enduring Loyalty from Ensolar

Vazquez explained that roof leaks are a main concern for new customers, so his installers always take time to explain the benefits of RT-MINI. "All our installers have a construction background, and they have full confidence that there will never be any leaks,"

Soltec reaches a net profit of €5.5 Mn in the second quarter of the year and increases its industrial segment margins to 6.4%

• The company maintains its guidance for 2022 and closes the second quarter strongly, reporting €146.7 Mn in revenues, an EBITDA of €7.9 Mn and a net profit of €5.5 Mn • The industrial division shows clear signs of recovery and reports EBITDA margins of 6.4% for the second quarter • The business development division achieves a pipeline of over 12.9 GW, and enters new regions: Mexico and Romania • 340 MW in photovoltaic projects were rotated in Italy through a partnership agreement with ACEA

RE+: Schletter Presents 1P Tracking System in North America

One of the highlights: the new 1P (one portrait) tracking system, which is being exhibited for the first time in North America. The GMax open-area system and the latest flat and pitched roof systems from the high-quality German manufacturer will also be shown at the trade show.

Solar Farm: Demands and Benefits

As solar farms have been widely used in the Asia-Pacific region giving opportunities for the industry to grow. This is mostly due to an increase in demand for renewable power.

Increasing yield by up to 20 percent: AEROCOMPACT launches mounting system for bifacial PV modules and green roofs

AEROCOMPACT, the Austrian PV manufacturer for racking solutions, has developed a flat roof system for mounting bifacial PV active modules or solar systems on green roofs. "Bifacial modules are replacing traditional foil modules more and more, especially in the US. The high elevation of our new system improves reflection and ensures higher yields," explains AEROCOMPACT product manager Philipp Pejcl. Independent laboratory tests have confirmed that bifacial modules can increase yields by up to 20 percent by reflecting light when the roof surface is bright. AEROCOMPACT will present the new system from 19 to 22 September at RE+, the largest and most comprehensive event in North America for the clean energy industry.

AEROCOMPACT optimizes CompactFLAT SN mounting system for PV installation on flat roofs

Austrian PV racking expert AEROCOMPACT has launched a rail-based mounting system - CompactFLAT SN 2 - for all common module sizes, including large-area solar modules up to 2.384 m x 1.303 m. The system is an optimized version of its predecessor, CompactFLAT SN, and is equally suitable for mounting framed PV modules on concrete, bitumen, foil and gravel roofs. AEROCOMPACT designed it for solar installations facing south or east/west with a tilt angle of 10°. "More variants of the SN 2 will follow at the end of the year so that we can meet all customer requirements with one system," says AEROCOMPACT product manager Irene Zemanek. AEROCOMPACT will present the new system from 19 to 22 September at RE+, the largest and most comprehensive event in North America for the clean energy industry.

IoT and the Cloud for Renewable Energy Adoption

Both will enhance the renewable energy sector as demand for solar and wind power increases. These are a few of the most notable benefits for industry professionals who take advantage of new technologies.

Trojan Battery Company Introduces 24- and 36-Volt Lithium-Ion Batteries at the ISSA Show North America 2022

Designed for professional floor-cleaning equipment, the new lithium-ion batteries combine long runtime with long lifetime to maximize your equipment uptime. Trojan's lithium-ion batteries are ideal for organizations that want to drive efficiency now and in the long run with a low total cost of ownership over their life.

Renogy Launches REGO, the First Fully Integrated Plug-and-Play Smart Solar System for Off-Grid Living

Simple and easy to install, REGO is an all-in-one solar power system specifically designed for first timers, DIYers and experienced solar users

Soltec connects its first FV plant in Brazil with a capacity of 112 MW

• The plant is owned by Powertis, the project development division of Soltec Power Holdings and was built by Soltec Brazil • With the operation of the plant, Soltec will help to avoid the emission of 175,000 tons of CO2 per year and will supply 115,000 households each year • Brazil is a strategic market for the company, where it has a project portfolio of more than 4.5 GW in various stages of development

Denmark's CNC Onsite first to offer onsite wind turbine blade root repairs

• Onsite blade root repair of inserts - first on the market • Inserts drilled out and replaced in days onsite • Reduced logistics costs, minimal downtime and environmental savings • Alternative to decommissioning; • Dutch partner We4Ce to supply high-strength replacement inserts • Premiere at Wind Energy Hamburg 27-30 September 2022

CarbonCapture Inc. Announces Five Megaton Direct Air Capture and Storage Project in Wyoming

Project Bison to be the first massively scalable deployment of DAC in the U.S. and the first to use Class VI wells for permanent CO2 storage

Customer-Centric Energy Products to build the Solutions needed to Fight Climate Change

Despite rapid growth, the market is still so nascent that the prospective customer population is still largely unaware of the opportunity community solar provides.

EDP launches Energy Starter 2022, a program to promote innovative initiatives in the energy sector

After the launch of the first module in May, EDP is now launching the second phase of the collaborative innovation program, with the aim of developing innovative solutions in renewable energies and green hydrogen for the global energy transition. Applications for startups are open until September 30.

Records 1066 to 1080 of 24324

First | Previous | Next | Last

Featured Product

Quality assurance in the manufacturing industry

Quality assurance in the manufacturing industry

Efficiency and precision with CSP software. In the highly competitive world of manufacturing, quality assurance is a critical factor for success. CSP offers you state-of-the-art software solutions specifically designed to ensure the highest standards of quality assurance in the manufacturing industry.