SeaRoc successfully install floating wind lidar for Garden State Offshore Energy – SeaZephIR® noted as ‘the future of offshore data collection' for wind farms
Garden State Offshore Energy is a planned utility scale project of approximately 1,000MW installed capacity, over 20 miles offshore due east of Avalon, NJ.
DEGER is world market leader in the field of solar tracking system.
Turbine Production Outpacing Projected Power Output----- Project Installed and Commissioned Ahead of Schedule----- GE Operating and Maintaining the 17, 1.5-77 Turbine Fleet
New Vishay Foil Resistors Alternative Energy Video Simulation Highlights the Stability of VCS1625Z Current Sense Resistor in Solar Panels
The resistor's stability won't change due to self-heating when carrying increased current loads.
The 50 megawatt facility, located in Greene County, Iowa was built by RPMA
Despite Devastating Impact of Sandy, Wind Energy Helps to Keep the Lights On in Northeast DWEA Members Report Little to No Impact on Wind Turbines along East Coast
Stories include little to no damage to members' wind turbines from North Carolina to New York, and beyond.
The Potential of Biofuels to Help Combat Climate Change - Join the Biodiesel and Waste Conference at World Biofuels Markets Exhibition and Congress
The biodiesel industry is changing apace. What was an established and secure global industry has been shaken by recent governmental support across the world for next generation production.
Today, GE celebrates its 20,000th wind turbine installation in conjunction with its 10-year anniversary in the wind industry. Altogether, GE's 20,000-turbine fleet has the capacity to power the cities of Hong Kong and London for an entire year. "We couldn't have achieved this milestone without our development partners," said Vic Abate, vice president of renewable energy for GE. "Together, we have advanced wind to its current status as a relevant, reliable, competitive source of energy." In the U.S. and Europe, 40 percent of new power generation installations over the last four years have been wind. GE achieved its 10,000th turbine milestone in November 2008, its 15,000th in February 2011 and in 2012 celebrates its 20,000th installation. "We congratulate GE on this impressive achievement," said Jim Shield, Invenergy's executive vice president and chief development officer. "Our longstanding association has resulted in the installation of more than 2,000 GE wind turbines at Invenergy projects across the United States. As America's largest independent wind power generation company, we look forward to a continued, successful relationship with GE in the years to come."
The American Wind Energy Association has unveiled a set of recommended practices for offshore wind facilities in the U.S. AWEA's Recommended Practices for Design, Deployment and Operation of Offshore Wind Turbines in the United States was developed with the help of the Department of Energy and the National Renewable Energy Laboratory.
Commercial forests are increasingly used as sites for wind farms owned by regional initiatives. However, since air turbulence above treetops can be severe, the wind turbines installed there must be high enough to avoid the turbulence caused by the trees. The latest generation of wind turbines offers hub heights of 140 metres and higher, thereby also producing higher energy yields. Yet, the success of a wind power project stands and falls by reliable cost-benefit analyses and wind power forecasting.
Lithium vanadium phosphate batteries add vanadium to the cathode of electric vehicle batteries. The result is a power source capable of producing more than six times the power of the typical lithium-ion batteries in such electric vehicles as the Chevrolet Volt or the Nissan LEAF (210 watts of power as opposed to 33 watts).
International Rescue Group installed two of OutBack Power's FLEXmax 80 charge controllers on board the Thunderbird 2. In combination with a 1.5 kilowatt array of BenQ solar panels and large bank of L16 batteries, OutBack's charge controllers make International Rescue Group's flagship boat a model for the rest of the fleet.
Our platform is focused primarily on the commercial scale market, though we have some utility scale opportunities and are evaluating the residential sector. We have the capabilities to implement rooftop, ground mounted or parking canopy systems.
CBD Energy's merger with Westinghouse Solar aligns with our strategy to create a more highly diversified business and accelerate access to growth opportunities in the renewable energy sector globally and in the US. The merger offers an ideal platform for the expansion of CBD Energy's business in the US, the world's largest market, and plans for U.S. operations built around its core strengths in design, engineering, procurement and construction (EPC) of commercial solar projects; energy efficiency and storage technologies; and energy services.
Baker Electric Solar is pleased to announce its new referral partner program. The program is open to everyone—with iPad Mini plus $50 Apple gift card or $400 cash bonus when a referral results in a new customer solar installation.
Records 15601 to 15615 of 26317
Solar & Wind - Featured Product
Tigo will announce the new product launch of the patented UHD-Core TS4-A (Advanced Retrofit/Add-on) Platform at SPI 2019. The new TS4-A-M (Monitoring) & TS4-A-S (Safety) units have improved lightweight hardware and lower labor costs to address a range of functions and budgets. The TS4-A-M allows module-level monitoring via Tigo's SMART Website & App. The TS4-A-S is UL-certified as a rapid shutdown solution for residential and C&I PV system. Both units join the Tigo's multivendor solution that works with almost any inverter and smart module in the global PV market. Contact firstname.lastname@example.org for pricing, shipping, and availability in Q4'19.