The University of Dayton Research Institute's Energy Experience Center is designed for research, testing and validation of more efficient and sustainable energy technologies.
Record Number of Customers Enabled by Innowatts AI-Based Energy Technology Platform
"The exhibitors at the joint stand of the federal state reflect current developments in modern energy provision and with continuous new, pathbreaking innovations they motivate their customers to contribute actively to shaping our energy future," says Thomas Einsfelder, Director of the Investment and Marketing Corporation Saxony-Anhalt
Trojan To Announce New Group 31 Deep-Cycle Solar AGM Battery and Showcase Africa Microgrid Projects at Intersolar Europe
Visit Trojan at booth B1.460 during Intersolar Europe from June 20 - 22 in Munich.
Brantley Solar Project in North Carolina is being installed with high-quality Solar FlexRack G3-X racking. The solar plant will generate enough electricity to power over 8,000 homes.
JLM Energy partners with N.E.R.D. Power to install first post-beta residential storage projects in Arizona
After successfully completing beta testing, with 400 Phazr battery installations in APS and SRP territories, JLM Energy, an energy technology company, is partnering with N.E.R.D. Power on residential solar plus storage projects in Arizona. JLM's earlier installations focused on performance testing including successful performance in extreme summer heat.
Deliveries begin in June for use across U.S.
Breakthrough perovskite thin film solar cell patents granted by the US Patent Office to Solar-Tectic LLC
The patents, US 9,978,532 "Maximizing the Power Conversion Efficiency of a Tin Perovskite/Silicon Thin-Film Tandem Solar Cell" and US ser. 15/157,539 "Methods of Growing Heteroepitaxial Single Crystal or Large Grained Semiconductor Films and Devices Thereon" are part of a "Tandem Series" of high efficiency and cost effective solar cell technologies by Solar-Tectic LLC with the potential to surpass the efficiencies of current thin-film solar cell technologies such as CdTe, CIGS, and a-Si, as well as the silicon technology which dominates the global market today based on poly and monocrystalline wafers.
CECEP Solar Energy Zhenjiang Company innovatively developed the drainage module, which not only effectively solves the problem of dust accumulation at the bottom of the module but also provides a self-cleaning function for the module.
This summer SINN Power will install five wave energy converter (WEC) modules with the revised SINN Power technology in Greece. After four weeks of construction, the preparations for the installation of the first two modules on the port wall were completed today.
• Contract extension to August 2022 supports Audi through vehicle launch
Energy monitoring innovator Smappee has launched the latest addition to its smart energy ecosystem with Smappee Switch, the most advanced smart plug on the market. Smappee Switch enables homeowners to remotely control and discover the energy consumption of almost any household appliance in tandem with their Smappee energy monitors.
VTT Research Centre of Technology (VTT) has explored the potential and economic benefits of new wind power technology. The technology would greatly increase the benefits of wind energy and enable the competitive utilisation of wind power in Finland.
The German manufacturer of heavy vehicles KAMAG Transporttechnik GmbH & Co. KG, partners up with Alelion Energy Systems AB as it focuses on sustainable autonomous vehicles - soon to be powered by Swedish lithium-ion batteries. The KAMAG order is a significant move for Alelion into a new segment and an important step towards Sweden's first factory for large-scale production of lithium-ion batteries for vehicles.
* Design Innovation takes centre stage as winners of MITSUBISHI ELECTRIC 'PUMP IT UP' CHALLENGE 2018 announced • 1380 pupils across nine West Lothian senior schools compete to create the most inventive use for an energy efficient heat pump.
Records 61 to 75 of 23352
SolarRoofHook's Low Profile QuickBOLT with Microflashing™ is the industry's affordable, UL Certified Asphalt Shingle mounting system. The Microflashing™ is compressed by the collar on the bolt to create a water-tight seal. With an installation time of less than one minute, the Low Profile QuickBOLT allows installers to complete more jobs.