Clayton Power made it possible for Per Aarsleff to both go green and reduce costs by clever implementation of mobile hybrid power systems based on lithium technology.

Aarsleff Goes Green with Modern Hybrid Power

Contributed by | Clayton Power

Clayton Power made it possible for Per Aarsleff to both go green and reduce costs by clever implementation of mobile hybrid power systems based on lithium technology.

 

Lithium ion batteries are more powerful and provide more energy for high consumption than traditional lead–acid batteries. They can be discharged with up to 80% compared to the traditional 30% to 50% without damaging the battery and are charged extremely fast, in down to 50 minutes for a 12V – 100Ah lithium battery.

Lithium ion battery packs are built of a number of individual lithium cells which must all maintain the same voltage for the battery to stay functional.

The integrated Battery Management System (BMS) ensures a long lifetime, safe handling –and high-accuracy State of Charge (SOC) calculations.

Therefore, all lithium ion batteries from Clayton Power have an integrated Battery Management System (BMS) that automatically balances the cells during charge, discharge and in idle mode. The BMS monitors the voltage and temperature of each lithium ion cell which influences the functionality of the battery.

The content & opinions in this article are the author’s and do not necessarily represent the views of AltEnergyMag

Comments (0)

This post does not have any comments. Be the first to leave a comment below.


Post A Comment

You must be logged in before you can post a comment. Login now.

Featured Product

POWER MAX™ Ballasted Roof Mounting System

POWER MAX™ Ballasted Roof Mounting System

Preformed Line Products introduces the POWER MAX Ballasted Roof Mounting System. The POWER MAX solar mounting system is engineered to maximize energy output on commercial flat roofs. Developed with the professional installer in mind, this system offers adjustable inter-row spacing in the field of up to 11 inches. It features 50% fewer components and a simplified design resulting in faster assembly rates and labor savings on every project. Available in a flush mount, 5˚ or 10˚ tilt or higher density dual tilt design, the POWER MAX base arrives stacked on pallets providing easier transport to the roof. Engineered as a fully ballasted, non-penetrating system, it accepts standard concrete blocks and is qualified by wind tunnel testing.