SunSaver solar controller available from Energy Matters

Morningstar's SunSaver is a leading small solar controller for both professional and consumer applications.

Morningstar's SunSaver is a leading small solar controller for both professional and consumer applications.


SunSaver's technology provides:

* Good reliability
* PWM battery charging
* Consistent high quality.

The SunSaver's advanced design delivers good performance and value. The

SunSaver's low cost is made possible by Morningstar's approach to design and manufacturing:

* Automated production
* ISO 9002 quality programs
* New power electronic technologies
* New control and logic technologies
* High volume manufacturing.

Features:

* Eight versions available 12 and 24 volts 6, 10 and 20 amps
* 100% solid state
* Series design (not shunt)
* True 0 to 100% PWM duty cycle
* Setpoint accuracy to 35 mV
* Rated for 25% overloads
* Fully encapsulated in epoxy potting
* Marine rated terminals / anodised case
* Temperature compensation
* Sealed / Flooded battery select
* No need to derate
* Parallel for 40 amps or more
* Green charging / red LVD indicators.

Mechanical specifications:

* Wire size #10 AWG (5.2 mm2)
* Anodised aluminium case
* Marine rated terminals
* Epoxy encapsulated
* Weight is 8 oz (0.23 kg).

Electrical specifications:

* 12 volt 24 volt
* Rated solar input 6.5 /10/20 A
* Rated load 6/10/20 A
* 25% current overload 5 min. 5 min.

Regulation voltage:

* Sealed battery 14.1 v 28.2 v
* Flooded battery 14.4 v 28.8 v
* Load disconnect 11.5 v 23.0 v
* LVD reconnect 12.6 v 25.2 v
* Temp. comp. (mV/°C) -28 -56
* Self-consumption 6 to 10 mA
* Operating temperature -40 to +85ºC.

The SunSaver solar controller is available from Energy Matters.

Featured Product

Introducing RockIt Smart Slide

Introducing RockIt Smart Slide

Introducing RockIt Smart Slide - the ultimate solution for fast and easy installation of the rail-less RockIt racking system on composition shingle roofs. Smart Slide conforms to UL 441 and TAS 100 (A)-95 for wind and wind-driven rain, providing a super-strong watertight seal that is achieved through compression, in most cases without the need for additional sealant. The waterproofing sealant is embedded deep into the granules of the shingle, thanks to the integrated flexible foam layer that provides cushioning. This ensures a secure fit that conforms to any architectural-style shingle. With UltraGrip Technologyâ„¢, you can rely on a secure installation, as it absorbs the movement created by thermal expansion and contraction. The pre-installed sealing pads are compatible with all composition shingle roofs, making it the ideal choice, even in ambient temperatures as low as 5 degrees.