SGS Presents Norderland Projekt GmbH with Statement of Compliance

On September 23, 2009, the SGS Wind Competence Center provided Norderland Projekt GmbH with Statement of Compliance (SoC) for the design basis of their two offshore wind farms - Northern Energy Global Tech II and Northern Energy Global Tech III.

On September 23, 2009, Norderland Projekt GmbH received a Statement of Compliance (SoC) for the design basis of their two wind farm projects. Both the Northern Energy Global Tech II and the Northern Energy Global Tech III were designed in accordance with appropriate consensus standards, assured SGS Wind Energy Competence Center.


The Statement of Compliance is a statutory requirement and precondition for the further development of wind farm projects. This is why each phase of a wind farm project has to be completed with it.

SGS Wind Energy Competence Center is an accredited partner of the Federal Maritime and Hydrographic Agency (BSH, or "Bundesamt fr Seeschifffahrt und Hydrographie") and as such was responsible for the verification and certification of the design basis of the two offshore wind farms.

The approval procedure of both wind farm projects lasted 3 months and comprised the verification of the design basis and the sub-structure design of the wind farms in accordance with the standards of the Federal Maritime and Hydrographic Agency of Germany. The verification process includes the assessment of all environmental conditions, such as wind, oceanographic, geotechnical and consequential load and design assumptions.

SGS Wind Energy Services

The SGS Wind Energy Competence Center in Hamburg, Germany, is one of the leading certification and inspection companies for onshore and offshore wind energy life cycle services, and carries out certifications in accordance with relevant standards. Through "step-by-step" Project Certification, SGS contributes significantly to the minimization of technical risks in wind farm projects.

SGS is committed to provide a fully comprehensive program for the Wind Energy Sector that is designed to meet the specific requirements of the wind energy market.

The SGS Group is the global leader and innovator in inspection, verification, testing and certification services. Founded in 1878, SGS is recognized as the global benchmark in quality and integrity. With more than 56,000 employees, SGS operates a network of over 1,000 offices and laboratories around the world.

For more information please contact:

SGS Industrial Services
SGS Competence Center Wind Energy

Alexander Heitmann
Global Project Manager Renewable Energy

SGS Group Management Ltd.
Raboisen 28
D - 20095 Hamburg

t: +49 (40) 30101 527
f: +49 89 1250406 8-527

Email: industrial.pr@sgs.com
Website: www.sgs.com/wind

Featured Product

TRA SNOW AND SUN - SOLAR TILE MOUNT

TRA SNOW AND SUN - SOLAR TILE MOUNT

You haven't installed a tile mount that is easier to install than the Solar Tile Mount manufactured by TRA Snow and Sun. Solar Tile Mount is used on all tile roof profiles: flat, mid, and high. It is made in the USA of aluminum alloy for strength and excellent corrosion resistance. Solar Tile Mount is built to allow more ease in installation with more rise from the tile surface to the rail for better air flow below panels. The adjustable base is longer than most allowing attachment 6" to the left or right to have the bracket in the base of the pan of the tile and still fasten to the rafter. Solar Tile Mount is adjustable for counter batten systems from ¾" to 3". The horizontal rail is directly above base fasteners giving greater uplift resistance than any other system. For superior waterproofing apply TRA Snow and Sun's butyl backed VersaFlash aluminum flashing. No tile flashing is needed on top of the tile for greater labor and material cost savings.