Within a one month period OSBIT Power (OP) has received orders for their MaXccess wind turbine access system from both Siemens and Scira Offshore Energy, positive feedback from E.ON following trials, and a message of congratulations from the Department of Energy and Climate Change (DECC)


For immediate release: 13 July 2012


Within a one month period OSBIT Power (OP) has received orders for their MaXccess wind turbine access system from both Siemens and Scira Offshore Energy (Scira is a joint venture between Statoil and Statkraft and owns the Sheringham Shoal offshore wind farm), positive feedback from E.ON following trials, and a message of congratulations from the Department of Energy and Climate Change (DECC) via 10 Downing Street.

Dr Tony Trapp, Chief Executive of the innovative company based in Northumberland in the north east of England, takes up the tale: "It really has been a most exciting and rewarding month, and marks the culmination of two very hard years of work perfecting the MaXccess system, and ensuring maximum awareness of its qualities. We were confident that once it was tested by stakeholders they would be as enthusiastic as we are about it, and this has certainly proved to be the case."

The MaXccess system creates a stable platform from which personnel can transfer to and from wind turbines. The system clamps on to either of the vertical buffer tubes of a standard boat landing, allowing the vessel to roll, pitch and yaw freely, while preventing vertical bow motion. The secure and measured connection is created without the need for active compensation or prediction of vessel motions. Users have the confidence that they will be transferring to and from the turbine via a stable platform and will not be exposed to sudden heaving of the vessel.

Siemens purchased the very first MaXccess system following testing in Norway at the Hywind Demo site by a strategic alliance comprising Siemens, OSBIT Power, Statoil and Fred Olsen Windcarrier. Siemens, which operates a Zero Harm health and safety policy, will apply the system on a wind project up to 30km offshore to increase experience and identify further optimisation opportunities before wider deployment. By using the system Siemens aims to significantly improve safety at sea for its technicians and help reduce the overall cost of offshore wind. Siemens' MaXccess will be operational in August.

Hot on the heels of the Siemens purchase came news that Scira Offshore Energy, operator of the Sheringham Shoal offshore wind farm, will similarly use the MaXccess to provide its wind farm technicians with safe and reliable access to wind turbines in a range of weather conditions. In this instance MaXccess will be used on wind farm support vessels, such as the South Boats design, and will be delivered in October following manufacture.

No sooner had that news been announced than E.ON publicised the fact that they had successfully trialled MaXccess on their Scroby Sands wind farm, highlighting the fact that "this is an innovative solution that could be used in commercial operation in the near-term"

And to cap it all came the message of congratulations from DECC. "In all honesty, we triggered this," explains Tony Trapp. "We heard news of the Sheringham Shoal contract at the time the Prime Minister, David Cameron, was making a very brief visit to Norway, and wrote asking him if he would like to make a comment on our success. Back came first a letter from 10 Downing Street, and then the following message from DECC:

"We congratulate OSBIT Power Ltd on the successful offshore trials of the MaXccess system on Statoil's Hywind Demo floating offshore wind turbine and E.ON's Scorby Sands wind farm. This has led to the first two commercial orders of the MaXccess system by Siemens and Scira Offshore Energy.

"Allowing personnel to safely access offshore wind turbines in more difficult sea conditions, reducing the cost and increasing the safety of offshore wind, are important for the successful growth of the offshore wind sector. OSBIT Power's success is a clear example of how UK engineering firms are leading the development of innovative solutions to help increase the safety and reduce the costs for the offshore wind sector.

"The Department of Energy and Climate Change (DECC) is pleased to be providing support for innovation in the development of the next generation of MaXccess technology through our Offshore Wind Component Technologies Scheme."

About OSBIT Power
Tony Trapp was an owner and director of SMD 1978-1996, and with three colleagues founded The Engineering Business (EB) in 1997. EB was sold to IHC Merwede in 2008. Tony founded OP in 2010, with two experienced engineering colleagues, Steve Bedford (COO) and Brendon Hayward (CTO).

The OP team has long experience in the concept development, design and build of many kinds of engineering systems in offshore wind, wave and tidal stream, oil and gas, submarine telecom and defence. It is now applying this expertise to the development of effective and commercially realistic solutions for marine and offshore markets with particular emphasis on wind power.

Further information on OP and MaXcess is available from www.osbitpower.com and from OSBIT Power Limited, Broomhaugh House, Riding Mill, Northumberland NE44 6EG, UK. Tel: +44 (0) 1434 682 505; Email: team@osbitpower.com


Issued on behalf of OSBIT Power by Judith Patten @ JPPR, judithpatten@jppr.uk.com and +44 (0)20 8241 1912

Featured Product

Thermal Seal Inspection for Improved Quality and Efficiency

Thermal Seal Inspection for Improved Quality and Efficiency

MoviTHERM's Thermal Seal Inspection (TSI) solution provides precise and reliable detection of defects in a variety of packaging types, including pouches, bags, blister packs, bottle caps, and more. By detecting defects in your packages, the TSI solution helps increase efficiency in your production line and ensures top-quality packaging is delivered to your customers every time. With state-of-the-art technology and an experienced team, MoviTHERM is dedicated to delivering accurate inspection solutions and peace of mind to its clients. Contact MoviTHERM today to learn more about their thermal seal inspection solution.