Meteodyn will attend the US Wind Power conference and exhibition!

2013 WINDPOWER in Chicago – May 5-8 – Booth No 3045

Once again this year, Meteodyn will exhibit and give software demonstrations during the most important

wind energy event in North America. You are warmly welcome to discuss, share experience and ask
questions to our experts.

Meteodyn will also present 2 posters validated by the AWEA authority:

‐ Evaluation of CFD wind flow computations at Andhra Lake wind farm (India)

‐ Optimal combination of CFD Modeling and Statistical
Learning for Short‐Term Wind Power
Forecasting

Meteodyn develops numerical wind modeling software and studies wind park projects' feasibility.
Wind resource assessment in every kind of terrains, extreme wind analysis, wind turbine location study to
optimize energy production: you need to know all these parameters to develop a profitable wind energy
project. The techniques used by Meteodyn, based on the Fluids Mechanics equations, are the most
performing and reliable ones to give you this precious information.

Meteodyn does not only work on the preliminary study. Meteodyn develops also wind production
forecasting solutions to optimize wind farm production taking care of wind machine lifespan.
For more information about our consulting topics, numerical software, visit our website at:
www.meteodyn.com/en

Featured Product

Darfon G320 Microinverter

Darfon G320 Microinverter

The Darfon G320 is the microinverter solution for today's high-power solar modules. The G320 handles 60- and 72-cell modules up to 350W DC and outputs up to 300W AC. The G320's 3-phase configuration accommodates the electrical distribution systems of most commercial buildings and to reduce, if not eliminate, the need for expensive transformers. The G320 comes in four voltage/phase configurations, so it can be installed in residential, commercial or utility applications.