Intersolar - RenewSys Showcases Its Innovative Eva Encapsulants And Backsheets At Intersolar San Francisco

The backsheet range includes Fluoro, non-Fluoro, Aluminium and Copper foil based backsheets in white and black colours.

SAN FRANCISCO, June 25, 2015 -- RenewSys India Pvt Ltd, a quality manufacturer of EVA Encapsulant and Backsheet for PV modules, showcases its latest innovative products at Intersolar San Francisco. Based at Bengaluru in India, RenewSys has acquired a major market share of EVA Encapsulant and Backsheets in India and is also expanding its European markets due to its consistently high quality and innovative product development capabilities.


Leveraging decades of polymer expertise and hi-tech R&D capability, the company has developed various innovative EVA Encapsulants and Backsheets during the last three year.

In addition to regular encapsulants, the company has developed Ultra-Fast Cure and PID Resistant encapsulants with varying UV cut-offs needed in the market. Its PID resistant EVA encapsulant is considered much better than other similar products available in the market, as it exhibits less than 1% power loss when tested as per IEC standard. The latest innovation is Ultra-Thin Encapsulant for MWT modules, developed specially for saving silver paste and thus reducing the BOM cost.

The company has also developed a wide range of backsheets suiting various PV module technologies like C-Si, Thin Film & MWT.

The backsheet range includes Fluoro, non-Fluoro, Aluminium and Copper foil based backsheets in white and black colours.

In line with the demand, the company has doubled its EVA Encapsulant capacity in April 15.

RenewSys has ambitious growth plans and a long term vision of the Renewable energy sector. The Cell-making is one of the investments in the advanced stage.

RenewSys invites you to booth no Level 1, 7739 to see its innovative products.

Featured Product

TRA SNOW AND SUN - SOLAR TILE MOUNT

TRA SNOW AND SUN - SOLAR TILE MOUNT

You haven't installed a tile mount that is easier to install than the Solar Tile Mount manufactured by TRA Snow and Sun. Solar Tile Mount is used on all tile roof profiles: flat, mid, and high. It is made in the USA of aluminum alloy for strength and excellent corrosion resistance. Solar Tile Mount is built to allow more ease in installation with more rise from the tile surface to the rail for better air flow below panels. The adjustable base is longer than most allowing attachment 6" to the left or right to have the bracket in the base of the pan of the tile and still fasten to the rafter. Solar Tile Mount is adjustable for counter batten systems from ¾" to 3". The horizontal rail is directly above base fasteners giving greater uplift resistance than any other system. For superior waterproofing apply TRA Snow and Sun's butyl backed VersaFlash aluminum flashing. No tile flashing is needed on top of the tile for greater labor and material cost savings.