The first 100% green project in Albania. First PV system combined with biomass.
On 1st March 2016, AEA-Albania Energy Association team implemented the first Photovoltaic System combined with biomass in Albania, Cerrik, at a children center managed by Caritas Albania "Balonat".
On 1st March 2016, AEA-Albania Energy Association team implemented the first Photovoltaic System in Albania, Cerrik, at a children center managed by Caritas Albania "Balonat".
More Headlines
- American Battery Technology Company Doubles Quarterly Production at Lithium-Ion Battery Recycling Facility
- Libattion Opens Europe's Largest Battery Upcycling Facility in Switzerland
- 'Record renewables generation underscores untapped potential of commercial solar' says expert
- Intersolar Europe 2025: Valentin Software with new program versions of PV*SOL premium and GeoT*SOL
- Register Now for CLEANPOWER 2025: Built to Power
The center has now also biomass system with pellet central boiler used for heating, and the PV system using it for electricity production. The PV system is 15kW which is up gradable to 20kW, and the biomass heating system is 35kW, enough to make the children center 100% green, ecological friendly and energetic independent.
The PV and the heating system were made possible as financial donation from Tektraco with representative Mr. Victor Sciberras who was present during the inauguration day. Also present during the inauguration was the ambassador of Germany in Albania Mr. Hellmut Hoffmann, the mayor of Cerrik Mr. Altin Toska who was ready to support for implementing this kind of project in the near future, the chairman of AEA Mr.Erlet Shaqe, also the presence of Mons. George Frendo as the president of Caritas Albania, was very noted as he is supporting the albanian communities in Albania that are in need.
Featured Product
HPS EnduraCoilTM Cast Resin Medium Voltage Transformer
HPS EnduraCoil is a high-performance cast resin transformer designed for many demanding and diverse applications while minimizing both installation and maintenance costs. Coils are formed with mineral-filled epoxy, reinforced with fiberglass and cast to provide complete void-free resin impregnation throughout the entire insulation system. HPS EnduraCoil complies with the new NRCan 2019 and DOE 2016 efficiency regulations and is approved by both UL and CSA standards. It is also seismic qualified per IBC 2012/ASCE 7-10/CBC 2013. Cast resin transformers are self-extinguishing in the unlikely event of fire, environmentally friendly and offer greater resistance to short circuits. HPS also offers wide range of accessories for transformer protection and monitoring requirements.
