NEW! Low Voltage/High Current Battery Charge/Discharge Test System – 9220 Series from NH Research, Inc.

For automated characterization, power cycling, & life-cycle testing of low voltage/high current batteries.

NEW! Low Voltage/High Current Battery Charge/Discharge Test System - 9220 Series

from NH Research, Inc.

For automated characterization, power cycling, & life-cycle testing of low voltage/high current batteries.

IRVINE, Calif. - Sept. 10, 2016 - PRLog -- NH Research, Inc. (NHR) has released its NEW 9220 Series Low Voltage/High Current Battery Charge/Discharge Test System (Dual Bay). This 9220 Series Dual Bay Test System is designed for testing all battery chemistries including lead-acid, lead-cadmium, and other low voltage, high current, large format batteries (LFB) typically used in energy storage systems (ESS). The system is bi-directional requiring no additional equipment to charge or discharge the unit-under-test (UUT). Additionally, the built-in measurement system eliminates external measurement devices by providing time-stamped digital readings for voltage, current, power as well as Ah and kWh.

Unlike typical high-current systems which convert battery discharge power into waste heat, the 9220 Series Dual Bay Test System converts up to 87% of the battery discharge power into usable electrical power that precisely matches the facility's AC line. This process, called regeneration, results in lower operating costs, reduces air-conditioning usage, eliminates expensive water cooling systems, and often provides enough savings to payback the entire system within a few years.

Contact NHR (http://nhresearch.com/nh-research-inc/contact-nh-research-inc/) for further details on the Low Voltage/High Current Battery Charge/Discharge Test System - 9220 Series (http://nhresearch.com/power-electronics-test-systems-and-instruments/battery-simulator-testing/low-voltage-high-current-battery-charge-discharge-test-system-9220-series/) and related battery testing solutions.

Featured Product

HPS EnduraCoilTM Cast Resin Medium Voltage Transformer

HPS EnduraCoilTM Cast Resin Medium Voltage Transformer

HPS EnduraCoil is a high-performance cast resin transformer designed for many demanding and diverse applications while minimizing both installation and maintenance costs. Coils are formed with mineral-filled epoxy, reinforced with fiberglass and cast to provide complete void-free resin impregnation throughout the entire insulation system. HPS EnduraCoil complies with the new NRCan 2019 and DOE 2016 efficiency regulations and is approved by both UL and CSA standards. It is also seismic qualified per IBC 2012/ASCE 7-10/CBC 2013. Cast resin transformers are self-extinguishing in the unlikely event of fire, environmentally friendly and offer greater resistance to short circuits. HPS also offers wide range of accessories for transformer protection and monitoring requirements.