Analysing wind forecasting in the Irish energy market

It is expected that Ireland will see greater penetration of wind generation in the next 20 years. According to the Tomorrow Energy Scenarios (TES) installed capacity forecast Ireland will have between 6GW to 8.2GW by 2040.

It is expected that Ireland will see greater penetration of wind generation in the next 20 years. According to the Tomorrow Energy Scenarios (TES) installed capacity forecast Ireland will have between 6GW to 8.2GW by 2040.


With wind generation growth set to continue, forecasting wind accurately will become increasingly important. Research from Cornwall Insight Ireland shows that wind generation has been under forecast across 2019, with 228 days experiencing higher than forecast wind output.

Joe Camish Analyst at Cornwall Insight Ireland, said:

"As Ireland heads towards a future where renewable generation - in particular wind power - becomes more prevalent. Predicting the weather and more importantly, the wind has never been more crucial, to be able to better balance supply and demand in the SEM.

"Wind forecasting in Ireland over the past year has been more conservative, with research from Cornwall Insight Ireland highlighting that of the 228 days where wind output was higher than forecast, more than half of these days were 5-10% higher than expected. The previous year experienced more extreme episodes of generation being >25% lower or higher than forecast.

"As we get closer to the year's end, we can see that fewer extreme events have occurred throughout the year compared to 2018. This indicates that the system operators' forecasts have improved year-on-year, an important development for balancing the system and for market participants actively trading and operating in the SEM."

Featured Product

HPS EnduraCoilTM Cast Resin Medium Voltage Transformer

HPS EnduraCoilTM Cast Resin Medium Voltage Transformer

HPS EnduraCoil is a high-performance cast resin transformer designed for many demanding and diverse applications while minimizing both installation and maintenance costs. Coils are formed with mineral-filled epoxy, reinforced with fiberglass and cast to provide complete void-free resin impregnation throughout the entire insulation system. HPS EnduraCoil complies with the new NRCan 2019 and DOE 2016 efficiency regulations and is approved by both UL and CSA standards. It is also seismic qualified per IBC 2012/ASCE 7-10/CBC 2013. Cast resin transformers are self-extinguishing in the unlikely event of fire, environmentally friendly and offer greater resistance to short circuits. HPS also offers wide range of accessories for transformer protection and monitoring requirements.