Fugro begins extensive site characterisation for ScottishPower Renewables’ East Anglia Hub

Fugro has begun the geophysical survey phase of a large multidisciplinary site investigation contract worth around GBP 55 million for ScottishPower Renewables' (SPR's) East Anglia Hub project.

Fugro has begun the geophysical survey phase of a large multidisciplinary site investigation contract worth around GBP 55 million for ScottishPower Renewables' (SPR's) East Anglia Hub project. The phased site investigations are scheduled to finish at the end of 2021 and support the development of wind farms in the UK southern North Sea over an area of more than 800 km2. The results from Fugro's site characterisation will feed into SPR's ground models for the East Anglia Hub and support seabed mobility assessment, foundation design and cable-route engineering.


Operating from dedicated geophysical survey vessels, the Fugro team began the UXO surveys in July; full coverage bathymetric surveys and sub-bottom profiler surveys across the site and export cable routes will follow. Data processing and reporting will be completed in Fugro's UK and Netherlands offices.

Geotechnical investigation of the wind turbine locations will start later this summer and will comprise ultra-deep seabed cone penetration tests (CPTs) using Fugro's innovative SEACALF® Mk V DeepDrive CPT system, downhole and seismic CPTs, geotechnical sampling, and geophysical borehole logging. Shallow geotechnical testing and sampling will be performed along the export cable routes, while standard and advanced soil testing will take place at Fugro's soil laboratory testing facility in Wallingford, UK.

Richard Hill, Fugro's proposal manager for the project, said: "This is a significant and exciting project for Fugro that will see us deploying multiple geophysical and geotechnical vessels from our fleet to the East Anglia Hub for the next 2 years. Fugro's innovative technologies, experienced geophysical and geotechnical survey teams, and large capacity for advanced soil testing laboratory in the UK will be crucial in helping SPR to meet their project timescales."

SPR's East Anglia Hub will eventually consist of 263 wind turbine generators capable of delivering a total installed capacity of up to 3.1 GW, enough to power up to 2.7 million homes.




Regulated information
This press release contains information that qualifies or may qualify as inside information within the meaning of Article 7(1) of the EU Market Abuse Regulation.

Featured Product

OMCO Origin® Factory-Direct Trackers

OMCO Origin® Factory-Direct Trackers

A One-In-Portrait (1P) solution that support a wide range of solar projects (utility scale, distributed generation (DG), & C&I markets). Manufactured and factory preassembled in the USA at one of OMCO Solar's 5 US plants (AZ, IN, AL, OH), OMCO makes all structural components with domestic steel and now can offer a 100% domestic tracker. OMCO Origin® Factory-Direct Trackers include universal module mounts with options for all commercially available modules, labor-saving bearings with 6 adjustable ways to compensate for posts and terrain issues, and foundation solutions for every terrain including OMCO C Piles.